Package contents | Barco MCFD 1219

Power Saving	The monitor comes with a power saving feature;
	therefore, you may put the monitor into a power
	saving state when it is not in use. This feature
	complies with both EPA‘s Energy Star
	requirements and European NUTEK/TCO’s
	power management guidelines. It conforms to
	Video Electronics Standard Association (VESA)
	approved DPMS power-down signaling method.
	This monitor automatically cuts down power
	consumption of monitor set when not detecting
	Hsync or Vsync signals. This feature is compliant
	with VESA DPMS.
Touch panel	The MFCD 1219 TS is equipped with a touch
	panel. Instructions on how to install and use the
	touch panel driver and controls can be found in
	the "TouchKit, Barco TouchScreen controller
	installation and user manual" on the supplied
	CD-ROM.

1.2 Package contents

The package should include the following items, please check. If some of the items are missing, please contact the reseller you have purchased the unit from.

-The display with foot

-12V DC adapter

-European power cord

-American power cord

-UK power cord

-Video cables: VGA cable and DVI-D cable

-Mounting plate with 4 screws

-This user manual

-Calibration software CD-ROM

-USB cable for touch panel

MFCD 1219 (TS) User's Guide