
Programming the Universal Remote to Control a
Laserdisc Player, DVD Player, or Second VCR
If you ever need to reprogram the remote to control a DVD player, laserdisc player, or second VCR, use the codes shown to the right.
1.Turn on the laserdisc player, DVD player, or second VCR.
2.Look up your brand and its code number(s) on code list at right.
3.Pressand hold the DVD.VCR button on the remote.
.4. Enter the
5.Release the DVDoVCR button and pressPOWER or another button to see if the laserdisc player or DVD player responds to the remote commands.
6.Repeat these steps using the next code listed for your brand, until the laserdisc player, DVD player, or second VCR responds to the remote commands.
Programming the Universal Remote
to Control an Audio Component
To program the remote for a
Follow these steps to program your universal remote to control your audio component:
1.Turn on the component to be programmed.
2.Look up your brand and code number(s) on the code list.
3.Pressand hold the component button on the remote.
4.Enter the
5.Release component button, then press POWER to see if the component responds to the remote commands. If it doesn't,try pressing the component button, then POWER again.
6.Repeat steps 3 through 5 using the next code listed for your brand until the component responds to the remote commands.
VCR | 33,37 |
Laserdisc player | 33,37 |
rRCA, ProScan, or GE Codes 1 | |
DVD player | 78 |
26