ProScan CRT Television Programmingthe Simple Remote, To program the VCR button using Code Search

PROGRAMMINGTHE SIMPLE REMOTE

-[here are two methods to program the simple remote'sVCR button: CODE SEARCH and DIRECT ENTRY. The simple remote'sTV button is already programmed for your TV.

To program the VCR button using CODE SEARCH

1.Make sure the VCR is turned off unless it is a PROSCAN, RCA, or GE product. If the VCR is a PROSCAN, GE, or RCA product, turn it on.

2.Pressthe VCR button and the POWER button simultaneously.

3.Releasethe two buttons.

4.Pressthe POWER button repeatedly until the VCR turns ON.

5.Pressthe CHAN v button to verify the VCR operates correctly. PressMENU to complete the process.

To program the VCR button using DIRECT ENTRY

1.Find the keypress combination for your VCR by locating your brand of VCR in the VCR Codes table on the next page.

2.Note the code numbers that follow your brand of VCR.

3.Locate the code number in the Key Combination chart on the next page.

4.Pressand hold the VCR button.

5.Enter the four keypresses shown in the Key Combination Chart.

Symbol Simple Remote Button

ACHAN UP

vCHAN DOWN

>VOL UP

<VOL DOWN

28