ProScan CRT Television manual Using the Remote to Control a Component, Tip for the Simple Remote

Using the Remote to Control a Component

Once the remote has been programmed with the correct codes, you're ready to use it to control your component.

To operate the component using the remote:

1.Press the component button (lW, VCR, DVDoVCR, SAToCABLE, AUDIO, etc.) to set the remote to control that component.

:2. Press POWER to turn the device off or on.

3.Use the remote buttons that apply to that device (CHAN buttons, transport keys, etc.).

Tip for the Simple Remote:

To change channels on theVCR, press and holdVCR, then pressTV. Release both and use the CHAN buttons to change channels. To return to using the simple remote buttons as trans- port keys, press VCR.

For PROSCAN, RCA, and GE devices, pressing the device button should turn the device on. Use the POWER button to turn the device off.

3O