ProScan CRT Television manual Back Panel, Input

BACK PANEL

INPUT 1

Lets you connect a video component such as a VCR, DSS receiver, or laserdisc player.

I./MONO Provides left audio connection. Or, if you are connecting a mono component, use the I_/MONO input. The left audio connector is usually white.

RIGHT Provides right audio connection. The right audio connector is usually red.

VIDEO Provides video connection. The video connector is usually yellow.

S-VIDEO Lets you connect a component with S-Video capability,

such as a satellite receiver or S-Video VCR. When using S-Video, make sure to connect the three audio/video cables, as well as the S-Video

connector.

INPUT 2

Provides connection to a second video component such as a VCR, satellite receiver, or laserdisc player. Its jacks are the same as described for INPUT 1, above.

INPUT 3

Provides connection to a third video component such as a VCR or laserdisc player.

L/MONO Provides left audio connection. Or, if you are connecting a mono component, use the L/MONO input. The left audio connector is usually white.

RIGHT Provides right audio connection. The right audio connector is

usually red.

VIDEO Provides video connection. The video connector is usually

yellow.

You can use the ANT B input for video games and switch between the two inputs using the ANTENNA button on the remote.

When usingTV games, computers and similar products with yourTV, keep the contrast at a low setting. If

a fixed (non-moving) pattern is left on the screen for long periods of time at a high contrast setting, the image can be permanently imprinted onto the picture tubes. These types of imprints are not covered by your warranty because they are the result of misuse.

36