TechniSat CAM 1 plus instruction manual Setting the UHF Output Channel

Page 10

4.4 Setting the UHF Output Channel

The procedure is as follows:

>Use the Menu key to select the Main Menu.

>Now select the entry Settings, marking it in blue by using the up/down arrow keys

>Confirm by pressing OK.

The sub-menu Settings will be displayed.

>Now use the up/down arrow keys to mark the line Audio/Video Settings

>Confirm by pressing OK..

The sub-menu Audio/Video will be displayed.

>Now select the line UHF Out Channel, marking it in blue by using the up/down arrow keys.

>Select a free UHF channel on your TV set in the range between 21 and 69.

>Finally, use the numeric key pad to enter the new output transmission channel in your receiver's memory.

The receiver will now transmit the signal on the UHF channel shown in the display. Should you still experience interference on the channel selected, please repeat the procedure until you find a suitable channel, free from interference.

10

Image 10

Contents TechniBox CAM 1 plus Remote control ExternalContents Page SCART-TV Please read this first Important hints on UsageSafety Instructions Equipment not in useConnecting a DVB receiver to a satellite installation Mains connection External InstallationConnections Connection to a Television setSetting the UHF Output Channel Amplifier Video Cassette Recorders VCRSuper VHS Video Cassette Recorders Serial Interface RSBasic Settings InstallationOSD Language Page Audio/Video Settings Adjustments for the External Unit Adjusting the Switching Matrix and LNB Properties Additional Settings Using the Numeric Key Pad Operation Switching on and offUsing the Programme up/down keys Using the Programme ListSelecting blocked programmes Reception of scrambled encrypted ProgrammesInformation Info Box Selecting a different language Adjusting sound volumeDolby Digital AC3 mode TV/Radio selectionAdditional Programme Information Return to previous programme selectedDisplaying Time and Programme Information Transponder InformationEPG functions allow you to Now Display of current programme contentsElectronic Programme Guide Entering EPG dataNext PreviewEPG Information Activate VCR Timer modeEPG Functions Preselect ProgrammesDisabling the timer function EPG SummaryEPG Search Displaying EPG Summary of other ChannelsProgramming the Timer VCR Important Notice Changing the Basic ProgrammingAdding/Deleting Channels Adding items to the User Channel ListDeleting items from the User List Sorting ChannelsLocking Channels Deleting items from the Total ListChange PIN Please NotePage Unblocking the parental lock for individual channels Programme SearchPage Page Activate factory settings/change data channels Common InterfacePage System Configuration Technical TermsIntermediate Frequency FrequencyFrequency range a Satellite or LNB LNB/LNC Low Noise Block converterTechnical Data Video decoding DemultiplexingCommon Interface Audio decodingRemote Control System RC-5 LNB power supplyTimer Serial Interface RSProblem Possible Cause Solution Troubleshooting GuidePower supply Mains switch Power usage Mains voltageHOT Using the up/down arrow keys Summary for everyday use Switching on and offVolume adjustment Using the programme/channel list