TechniSat CAM 1 plus Common Interface, Activate factory settings/change data channels

Page 37

>Use the up/down arrow keys to mark the entry Program.

>Confirm with the OK key.

The menu >Search>Program will be displayed.

This menu differs from the Transponder menu only in terms of the list item Service ID.

>Proceed as described in Point 7.7.3 above.

>Use the up/down arrow keys to mark the entry Service ID.

>Use the numeric key pad to enter the Service ID number.

7.8 Common Interface

This entry provides you with access to the sub-menus of the CA modules in slots A or B, when inserted. Use the arrow keys to mark the desired function, one of the slots, and con-

firm with OK. You can then obtain information relating to the smart card inserted.

7.9 Activate factory settings/change data channels

You may at any stage revert to the original default settings for the LNB, as set in the factory. You may also wish to delete the programme list, which may be outdated, completely before initiating a new search. Please note that, if you delete all programmes from memory, you will then have to initiate a search, and you will have to copy your selected programmes from the Total List into the User List.

>Use the Menu key to display the Main Menu.

>Use the up/down arrow keys to mark the entry Settings.

>Confirm with the OK key.

The sub-menu >Settings will be displayed.

37

Image 37

Contents TechniBox CAM 1 plus External Remote controlContents Page SCART-TV Important hints on Usage Please read this firstEquipment not in use Safety InstructionsConnecting a DVB receiver to a satellite installation Connections External InstallationMains connection Connection to a Television setSetting the UHF Output Channel Super VHS Video Cassette Recorders Video Cassette Recorders VCRAmplifier Serial Interface RSBasic Settings InstallationOSD Language Page Audio/Video Settings Adjustments for the External Unit Adjusting the Switching Matrix and LNB Properties Additional Settings Using the Programme up/down keys Operation Switching on and offUsing the Numeric Key Pad Using the Programme ListSelecting blocked programmes Reception of scrambled encrypted ProgrammesInformation Info Box Dolby Digital AC3 mode Adjusting sound volumeSelecting a different language TV/Radio selectionDisplaying Time and Programme Information Return to previous programme selectedAdditional Programme Information Transponder InformationElectronic Programme Guide Now Display of current programme contentsEPG functions allow you to Entering EPG dataPreview NextEPG Functions Activate VCR Timer modeEPG Information Preselect ProgrammesEPG Summary Disabling the timer functionDisplaying EPG Summary of other Channels EPG SearchProgramming the Timer VCR Changing the Basic Programming Important NoticeAdding items to the User Channel List Adding/Deleting ChannelsLocking Channels Sorting ChannelsDeleting items from the User List Deleting items from the Total ListPlease Note Change PINPage Programme Search Unblocking the parental lock for individual channelsPage Page Common Interface Activate factory settings/change data channelsPage Technical Terms System ConfigurationFrequency range a Satellite or LNB FrequencyIntermediate Frequency LNB/LNC Low Noise Block converterTechnical Data Common Interface DemultiplexingVideo decoding Audio decodingTimer LNB power supplyRemote Control System RC-5 Serial Interface RSPower supply Mains switch Power usage Troubleshooting GuideProblem Possible Cause Solution Mains voltageHOT Volume adjustment Summary for everyday use Switching on and offUsing the up/down arrow keys Using the programme/channel list