TechniSat CAM 1 plus instruction manual Adjustments for the External Unit

Page 15
15

been enabled, and the preferred language selected in terms of the Audio signal selection is available, the sub-titles will be superimposed on the picture automatically. If the function has

not been enabled, it can be set manually, Sub-titles are indicated by the symboll in the information display. Please also refer to Point 6.12 in this instruction manual..

Dolby Digital (AC3)

A number of movies are broadcast in Dolby Digital sound format. This will be shown on scre-

en, as the Dolby logo will be displayed in the information window once the programme has been selected. Where broadcast, and if you are equipped with a Dolby Digital 5.1 chan- nel amplifier, you can enjoy the appropriate movies in full 5.1 Dolby Surround Sound.

All you need to do to anjoy this feature is to connect the Audio Out Digital connection of you DVB receiver (see Point 4.6.2 above) to the digital input of your Dolby Digital 5.1 channel amplifier.

Where a programme is broadcast in Dolby Digital Sound, the Dolby logo will be displayed in the information window on screen as soon as the programme is selected. If the option Dolby Digital (AC3) has been selected in the relevant menu, these broadcasts will automatically be reproduced in Dolby Digital format.

If the AC3 function has not been selected previously, Dolby Digital Sound can also be selec- ted manually. Note Point 6.4.1 of the instruction manual for this facility.

TechniLink

The TechniLink function of your receiver controles the record function of the connected VCR in the timer operation. Is the receiver in timer operation the VCR records the selected pro- gramme without programming the VCR. Condition for this is that the VCR supports the Tech-

niLink function. Questions concerning the TechniLink function answers your retailer. Switch the TechniLink function by pressing the OK key on or off.

5.4 Adjustments for the External Unit

Once you have made all the individual selections, to make the receiver conform to your pre- ferences, it may still be necessary to make some adjustments for the receiver to work opti- mally with your antenna/satellite dish. The default factory setting is pre-programmed for reception of ASTRA and EUTELSAT broadcasts by means of a universal LNB (see Glossary at end for technical terms). Once the receiver has been connected to an external reception unit and switched on, these programmes can be received without any further adjustments. Should you also wish to receive signals from other satellites, or if you have a different type of LNB, you can make the following adjustments in your receiver to provide for these program- mes:

>Press the Menu key to display the Main Menu.

>Use the up/down arrow keys to select the entry Settings.

>Confirm by pressing the OK key.

The menu Settings will be displayed.

Page 14 Page 16
Image 15
Page 14 Page 16
Contents TechniBox CAM 1 plus External Remote controlContents Page SCART-TV Important hints on Usage Please read this firstEquipment not in use Safety InstructionsConnecting a DVB receiver to a satellite installation Connection to a Television set External InstallationConnections Mains connectionSetting the UHF Output Channel Serial Interface RS Video Cassette Recorders VCRSuper VHS Video Cassette Recorders AmplifierInstallation Basic SettingsOSD Language Page Audio/Video Settings Adjustments for the External Unit Adjusting the Switching Matrix and LNB Properties Additional Settings Using the Programme List Operation Switching on and offUsing the Programme up/down keys Using the Numeric Key PadReception of scrambled encrypted Programmes Selecting blocked programmesInformation Info Box TV/Radio selection Adjusting sound volumeDolby Digital AC3 mode Selecting a different languageTransponder Information Return to previous programme selectedDisplaying Time and Programme Information Additional Programme InformationEntering EPG data Now Display of current programme contentsElectronic Programme Guide EPG functions allow you toPreview NextPreselect Programmes Activate VCR Timer modeEPG Functions EPG InformationEPG Summary Disabling the timer functionDisplaying EPG Summary of other Channels EPG SearchProgramming the Timer VCR Changing the Basic Programming Important NoticeAdding items to the User Channel List Adding/Deleting ChannelsDeleting items from the Total List Sorting ChannelsLocking Channels Deleting items from the User ListPlease Note Change PINPage Programme Search Unblocking the parental lock for individual channelsPage Page Common Interface Activate factory settings/change data channelsPage Technical Terms System ConfigurationLNB/LNC Low Noise Block converter FrequencyFrequency range a Satellite or LNB Intermediate FrequencyTechnical Data Audio decoding DemultiplexingCommon Interface Video decodingSerial Interface RS LNB power supplyTimer Remote Control System RC-5Mains voltage Troubleshooting GuidePower supply Mains switch Power usage Problem Possible Cause SolutionHOT Using the programme/channel list Summary for everyday use Switching on and offVolume adjustment Using the up/down arrow keys
Top Page Image Contents