TechniSat CAM 1 plus instruction manual Adjusting the Switching Matrix and LNB Properties

Page 16

>Now use the up/down arrow keys to select the entry LNB Settings

>Confirm by pressing the OK key.

The menu Settings LNB will be displayed.

The following selections can be made in this sub-menu:

5.4.1 DiSEqC ein- ausschalten

DiSEqC (Digital Satellite Equipment Control) is a digital signal that can control the functions of DiSEqC-compatible components via the antenna connection.

If your external installation features DiSEqC components, you should enable the DiSEqC control function:

>When this entry is highlighted, use the OK key to switch the DiSEqC function on or off.

5.4.2Adjusting the Switching Matrix and LNB Properties

The menu reflects the four switching criteria of the DiSEqC control.

Your receiver is pre-programmed to receive ASTRA broadcasts on switch setting A/A, and EUTELSAT signals on setting B/A of a Multiswitch. Should the switching matrix of your exter- nal receiving unit be set up differently, or should you wish to receive satellite signals other than those mentioned, you can adjust the receiver settings as follows:

>Use the up/down arrow keys to select the DiSEqC switch position (1-4) that you wish to use for allocation to a satellite (e.g. A/B 3 No Satellite), and highlight the appropriate entry.

>Press the OK key to confirm.

A list of several satellites will be displayed, from which you can make your selection.

>Use the up/down arrow keys to select the appropriate satellite.

Pressing the up/down arrow keys will move the marker by one line at a time, up or down, while the left/right arrow keys will take you to the previous or following pages respectively.

Should the satellite you are looking for not be included in the list, please select one of the spare settings, which are marked User 1 to User 15.

>Confirm by pressing the OK key.

The highlighted entry will now be inserted in the Menu >Settings>LNB at the pre- viously selected position.

16

Image 16
Contents TechniBox CAM 1 plus Remote control ExternalContents Page SCART-TV Please read this first Important hints on UsageSafety Instructions Equipment not in useConnecting a DVB receiver to a satellite installation External Installation ConnectionsMains connection Connection to a Television setSetting the UHF Output Channel Video Cassette Recorders VCR Super VHS Video Cassette RecordersAmplifier Serial Interface RSBasic Settings InstallationOSD Language Page Audio/Video Settings Adjustments for the External Unit Adjusting the Switching Matrix and LNB Properties Additional Settings Operation Switching on and off Using the Programme up/down keysUsing the Numeric Key Pad Using the Programme ListSelecting blocked programmes Reception of scrambled encrypted ProgrammesInformation Info Box Adjusting sound volume Dolby Digital AC3 modeSelecting a different language TV/Radio selectionReturn to previous programme selected Displaying Time and Programme InformationAdditional Programme Information Transponder InformationNow Display of current programme contents Electronic Programme GuideEPG functions allow you to Entering EPG dataNext PreviewActivate VCR Timer mode EPG FunctionsEPG Information Preselect ProgrammesDisabling the timer function EPG SummaryEPG Search Displaying EPG Summary of other ChannelsProgramming the Timer VCR Important Notice Changing the Basic ProgrammingAdding/Deleting Channels Adding items to the User Channel ListSorting Channels Locking ChannelsDeleting items from the User List Deleting items from the Total ListChange PIN Please NotePage Unblocking the parental lock for individual channels Programme SearchPage Page Activate factory settings/change data channels Common InterfacePage System Configuration Technical TermsFrequency Frequency range a Satellite or LNBIntermediate Frequency LNB/LNC Low Noise Block converterTechnical Data Demultiplexing Common InterfaceVideo decoding Audio decodingLNB power supply TimerRemote Control System RC-5 Serial Interface RSTroubleshooting Guide Power supply Mains switch Power usageProblem Possible Cause Solution Mains voltageHOT Summary for everyday use Switching on and off Volume adjustmentUsing the up/down arrow keys Using the programme/channel list