TechniSat HD-VISION 40 PVR VHS Video cassette recorder/Video camera, HiFi amplifier, Sub-woofer

Page 15

4.5 S-VHS Video cassette recorder/Video camera

If you would like to play back S-VHS video recorder or video camera signals on your television set, connect the devices to the Video/S-Video inputs on the left rear side of the set.

4.6 HiFi amplifier

4.6.1 Analogue

Connect the Cinch sockets of the back analogue audio output of the television set by a sui- table cable to an input of your HiFi amplifier (e.g. CD or AUX; Note! The phono-input is not sui- table!).

4.6.2 Digital

If your amplifier is equipped with an appropriate electrical or optical input (SPDIF), then connect the digital audio output socket (electrical or optical) to the input of your amplifier. The sampling rates 32, 44.1 and 48 kHz are available, depending on the respective station.

A Dolby Digital signal (AC3) is also available at this output, if transmitted.

4.7 Sub-woofer

Connect an available active sub-woofer by a suitable cable to the sub-woofer output.

4.8 Serial interface (RS 232)

The RS 232 interface enables updating the system software and pre Programming via the PC.

4.9 USB socket

The USB connection enables updating the system software and pre Programming via the PC or USB.

4.10 Headphones

If you would like to use headphones, connect them to the headphone connection on the left rear side of the set.

4.11 PC

If your PC is equipped with a DVI output, we recommend, connecting the PC with a DVI HDMI cable to the HDMI connection of the television set. Otherwise, please use a VGA cable and connect the PC to the VGA connection of the television set.

>With help of the 0/AV key of the remote control switch the TV set to VGA or HDMI playback.

The switchover should be accomplished automatically when connecting via a DVI-HDMI cable.

You should configure the resolution of the graphics card before connecting the PC to the televi- sion in such a way, that the format corresponds to a format supported by the television.

You can find the supported formats in the technical data (Section 15). E.g., the resolution 1024*768@60Hz is supported.

To set a specific resolution for your graphics card please read the operating system instructions of your PC. You can normally find this setting Windows in the menu Start -> Settings -> System control -> Display ->Settings.

15

EN

Image 15

Contents TFT-LCD television set with integrated hard disk HD-VISION 32 PVR HD-VISION 40 PVRTable of contents Replay Hard disk mode RecordingStation search function SettingsProgramme management Special functions Service settingsIllustrations Remote control23 24 25 26 27 28 29 Mains ConnectionsManual control Transport Please read firstIntended use Manufacturers declarationRemote control / Replacing the batteries Care and cleaningSafety regulations Operating intervals Wall mountingRemoving the pedestal Detachable loudspeakers Removing the loudspeakersHD-Vision TV set variant with side loudspea Video cassette recorder ConnectionsVideo cassette recorder Antenna/cable connector analogue and digitalSatellite antenna DVD playerSub-woofer HeadphonesVHS Video cassette recorder/Video camera HiFi amplifierMains connection Initial installationSoftware update Selection of the reception signalsDiSEqC configuration DVB-S Antenna settings DVB-TTurning the TV set on and off OperationBy means of the numeric keyboard Programme selectionTurning the TV set off With the Programme up/down keysInfobox Select listCalling locked programmes Return to the last set programmeRadio Reception of encoded programmesAV source Special functionsSelection of a different Language/Sound option Volume adjustmentSelection Dolby Digital AC3 modeTeletext Turning teletext on/offSleep timer Format change/Zoom Switching TV/RadioFreeze image Channel/Transponder/Source informationImporting the SFI-data Format change in VGA modeInterrupting the import procedure Programme guide SFISFI functions Now Table with current programme contentsLater MoreAborting timer operation Programming the SFI TimerDeleting the timer programming During timer operationReturn SFI programme overviewDisplaying an SFI overview of other programmes Overview by programme type/genreImmediate recording Starting Record manually Hard disk modeRecording Exiting SFITimer recordings Stopping recording manuallyStopping recording automatically Manually programming the timer Calling the timer overviewStoring data in the memory Changing the timer programming Timeshift functionTime Playback of hard disk recordings Setting markers during a recordingReplay Starting the timeshift functionJump to markers Setting markersHard disk management Fast forward and backward windingEditing Managing the recordingsDeleting Parental lock functionPlease note Jump to markerDeleting a section Extracting a sectionChecking the hard disk Splitting a recordingHard disk information Hard disk managementManually adjusting picture values SettingsPicture / Hdmi / VGA settings Calling preset picture settingsContrast Colour temperatureBackground lighting BrightnessMovement compensationonly picture settings Aspect ratioSelect the edge smoothing line with the up/down arrow keys Switching on volume Sound settingsExiting picture settings Trigger threshold only VGA settingsHeadphone mode Bass volumeAutomatic Volume Leveller AVL Headphone volumePIN query Exiting sound settings2nd Language Audio signal Protection of MinorsChanging the device pin Selecting TV stations / Radio stationsSelecting blocks Programming the electronic programme guide SFI channel DVB-C/T Update timeSFI update SFI channel DVB-SStart category Antenna settings DVB-SLNB Type Setting the arrayFurther settings/LNB characteristics Turning DiSEqC on/offAntenna settings DVB-T Starting the automatic search Station search functionAutomatic search Calling the station search functionExtended search for analogue TV programmes Analogue CT Extended searchAfter the search run Extended search for analogue radio programmes FM RadioExtended search for DVB-S programmes Extended search for DVB-C programmesExtended search for DVB-T programmes Starting the extendedsearch Manual search /Modification of the programme nameManual search of an analogue radio programme FM-Radio SavingManual search for an analogue TV programme Analogue CT Use the up/down arrow keys to select the Standard line Symbol rateUse the up/down arrow keys to select the Symbol rate line StandardModulation Manual search for DVB-C programmesManual search for DVB-T programmes Starting the manual DVB-S/DVB-C/DVB-T searchStarting the PID search DVB-S/DVB-C/DVB-T Programme managementCalling the programme management PIDsearch DVB-S/DVB-C/DVB-TAdding programmes to the favourites list Selecting a favourites listSelecting the full list Deleting from the complete list Deleting programmesSorting programmes Removing deleting from the favourites listSpecial functions Factory settings Service settingsMessage New programme list available Software updateManually starting the programme list update Updating the programme list Isipro only DVB-SStoring individual programmes Channel optimisationDeleting programmes Adding TV or radio programmesDeleting all programmes System configurationOperating language Menu language Encoding systemOperation Technical dataPicture AudioConnection S-Video input Hosiden Connection serial interface RS Connection Headphone jackKHz modulation Remote control Mains adapterGeneral Error Possible cause Corrective Troubleshooting aids