6.2.7 AV source
>In order to select a device connected to the Scart sockets, component input, to the HDMI inputs, to the VGA connection or to the AV connection of the TV set, press the AV key.
The selection window AV source is displayed on the screen with the available AV connections.
>Use the up/down arrow keys to select the required source.
TV | Internal reception unit: TV |
Radio | Internal reception unit: Radio |
ext. Device on Scart connector 1 | |
ext. Device on Scart connector 2 | |
| ext. Device on AV connections (Cinch or |
YUV | ext. Device on component input |
HDMI 1 | ext. Device on HDMI input 1 |
HDMI 2 | ext. Device on HDMI input 2 |
VGA | VGA input (PC) |
>Acknowledge with OK to switch to the selected input.
>In order to return to television operation, press the AV key again and using the up/down arrow keys select the TV line or press the TV/Radio key.
Please note:
It is not possible to operate devices simultaneously if they are connected to both the Video Cinch- connection and to the
6.3 Reception of encoded programmes
Your unit is equipped with an integrated CONAX decoder system as well as a “Common Interfa- ce” for recording from two
>Insert the CONAX smart card in the card slot of the integrated card reader. (The golden chip should point forwards and in the insertion direction)
or
>Insert a CI module into the slot with the top pointing to the rear.
>Insert the smart card into the card slot of the CI module.
Make sure that the golden chip of the smart card is pointed to the rear in insertion direc- tion.
>Your television set now automatically checks the CI slot, if an encoded programme has been set and displays the programme unencrypted, if an appropriate CI module with a valid smart card is available for this programme.
Special functions
Some programme positions offer you specific special functions. On these
Certain channels also let you select the time you would like your ordered film to start.
EN
21