TechniSat HD-VISION 40 PVR, HD-VISION 32 PVR manual Programme selection, Turning the TV set off

Page 19

or

>by pressing a numeric key from 0 to 9 on the remote control

or

>by turning a device on, which is connected to an external input. (During activated Auto- start function, section 11) The operating mode is signalled by a green LED.

Turning the TV set off

>Turn the TV set off by pressing the mains switch on the device or by pressing the On/Standby key on the remote control/on the set.

The TV set is in the standby mode, if it was turned off with the On/Standby key. The LED display is red in this case.

>The TV set can be additionally turn off with the Autostop function (see section 11).

The device remembers, whether it was set to "On" or "Off", as entered with the remote control or keys of the set.

If the TV set was turned off with the mains switch during operation, it starts up directly in the operating mode after being turned on again with the mains switch.

The TV set should be turned off with the mains switch in case of electrical power outage, so that it will not turn itself on again inadvertently.

6.2 Programme selection

6.2.1 With the Programme up/down keys

>You can move up and down through the programmes by one programme position res- pectively with the Programme +/- key on the remote control/on the set.

6.2.2 By means of the numeric keyboard

>Enter the required programme number on the numeric keyboard. For example:

1

 

 

for programme position 1

1,

then 4

 

for programme position 14

2,

then 3,

then 4

for programme position 234

1,

then 2,

then 4, then 5

for programme position 1245

When entering multi-digit programme numbers, you have approximately three seconds time after pressing a key to complete the input.

If you only want to enter a 1,2 or 3-digit number, you can accelerate the input procedure by pressing the last number for a longer period.

6.2.3 By means of the programme list

>Press the OK key.

The programme list is now displayed. Only TV programmes are displayed in the TV mode and only radio programmes in the radio mode. The currently set programme is highlighted.

>By means of the arrow keys or numeric keyboard, you can now select the required programme.

Move the marker by one line at the time through the list with the up/down arrow

EN

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents TFT-LCD television set with integrated hard disk HD-VISION 32 PVR HD-VISION 40 PVRTable of contents Replay Hard disk mode RecordingStation search function SettingsProgramme management Special functions Service settingsIllustrations Remote controlConnections 23 24 25 26 27 28 29 MainsManual control Transport Please read firstIntended use Manufacturers declarationCare and cleaning Remote control / Replacing the batteriesSafety regulations Wall mounting Operating intervalsRemoving the pedestal Removing the loudspeakers Detachable loudspeakersHD-Vision TV set variant with side loudspea Video cassette recorder ConnectionsVideo cassette recorder Antenna/cable connector analogue and digitalSatellite antenna DVD playerSub-woofer HeadphonesVHS Video cassette recorder/Video camera HiFi amplifierMains connection Initial installationSoftware update Selection of the reception signalsDiSEqC configuration DVB-S Antenna settings DVB-TTurning the TV set on and off OperationBy means of the numeric keyboard Programme selectionTurning the TV set off With the Programme up/down keysInfobox Select listCalling locked programmes Return to the last set programmeRadio Reception of encoded programmesAV source Special functionsSelection of a different Language/Sound option Volume adjustmentSelection Dolby Digital AC3 modeTeletext Turning teletext on/offSleep timer Format change/Zoom Switching TV/RadioFreeze image Channel/Transponder/Source informationImporting the SFI-data Format change in VGA modeInterrupting the import procedure Programme guide SFISFI functions Now Table with current programme contentsLater MoreAborting timer operation Programming the SFI TimerDeleting the timer programming During timer operationReturn SFI programme overviewDisplaying an SFI overview of other programmes Overview by programme type/genreImmediate recording Starting Record manually Hard disk modeRecording Exiting SFIStopping recording manually Timer recordingsStopping recording automatically Manually programming the timer Calling the timer overviewStoring data in the memory Timeshift function Changing the timer programmingTime Playback of hard disk recordings Setting markers during a recordingReplay Starting the timeshift functionJump to markers Setting markersHard disk management Fast forward and backward windingEditing Managing the recordingsDeleting Parental lock functionPlease note Jump to markerDeleting a section Extracting a sectionChecking the hard disk Splitting a recordingHard disk information Hard disk managementManually adjusting picture values SettingsPicture / Hdmi / VGA settings Calling preset picture settingsContrast Colour temperatureBackground lighting BrightnessAspect ratio Movement compensationonly picture settingsSelect the edge smoothing line with the up/down arrow keys Switching on volume Sound settingsExiting picture settings Trigger threshold only VGA settingsHeadphone mode Bass volumeAutomatic Volume Leveller AVL Headphone volumePIN query Exiting sound settings2nd Language Audio signal Protection of MinorsSelecting TV stations / Radio stations Changing the device pinSelecting blocks Programming the electronic programme guide SFI channel DVB-C/T Update timeSFI update SFI channel DVB-SStart category Antenna settings DVB-SLNB Type Setting the arrayFurther settings/LNB characteristics Turning DiSEqC on/offAntenna settings DVB-T Starting the automatic search Station search functionAutomatic search Calling the station search functionExtended search for analogue TV programmes Analogue CT Extended searchAfter the search run Extended search for analogue radio programmes FM RadioExtended search for DVB-C programmes Extended search for DVB-S programmesExtended search for DVB-T programmes Starting the extendedsearch Manual search /Modification of the programme nameSaving Manual search of an analogue radio programme FM-RadioManual search for an analogue TV programme Analogue CT Use the up/down arrow keys to select the Standard line Symbol rateUse the up/down arrow keys to select the Symbol rate line StandardModulation Manual search for DVB-C programmesManual search for DVB-T programmes Starting the manual DVB-S/DVB-C/DVB-T searchStarting the PID search DVB-S/DVB-C/DVB-T Programme managementCalling the programme management PIDsearch DVB-S/DVB-C/DVB-TSelecting a favourites list Adding programmes to the favourites listSelecting the full list Deleting from the complete list Deleting programmesSorting programmes Removing deleting from the favourites listSpecial functions Factory settings Service settingsMessage New programme list available Software updateManually starting the programme list update Updating the programme list Isipro only DVB-SStoring individual programmes Channel optimisationDeleting programmes Adding TV or radio programmesDeleting all programmes System configurationOperating language Menu language Encoding systemOperation Technical dataPicture AudioConnection S-Video input Hosiden Connection serial interface RS Connection Headphone jackKHz modulation Mains adapter Remote controlGeneral Error Possible cause Corrective Troubleshooting aids
Top Page Image Contents