ENGLISH
OPERATING INSTRUCTIONS (continued)
Input Selection
■The input is switched by pressing the RGB1, RGB2, VIDEO1 or VIDEO2 button on the remote control. Pressing the INPUT SELECT button on the monitor main unit switches the input in the order of
RGB1 → RGB2 → VIDEO1 → | Remote |
|
|
| |
controller |
| When using INPUT SELECT | |||
VIDEO2 → RGB1. | VIDEO 1 VIDEO 2 | RGB 1 RGB 2 | |||
RGB1 | |||||
|
| ||||
• When the same signal is input to RGB1 and |
|
| |||
|
|
|
| ||
RGB2, the phase may in some cases shift | Main unit |
| RGB2 | (BNC input) | |
slightly but this is not a malfunction. In such |
|
| VIDEO1 | (composite or S input) | |
case, readjust the PHASE of the one being |
|
| |||
|
|
|
| ||
used. |
| INPUT SELECT | VIDEO2 | (COMPONENT input) | |
|
| ||||
Volume Adjustment
■While the
| Remote | |
• The adjustment status will be displayed as | controller | |
VOLUME+ | ||
guidance while you press these buttons. | Sound volume setting | |
• While the guidance is on display, press VOLUME+ | VOLUME- | |
or ▲ to turn up the volume. | VOLUME : 30 | |
• While the guidance is on display, press VOLUME- | ||
Main unit | ||
or ▼ to turn down the volume. | Adjustment status guidance | |
• You can also adjust the sound volume setting | ||
via the | VOLUME | |
|
•The sound volume adjustment mode will exit
when no keys are entered for 5 seconds. (The adjustment status guidance will disappear automatically.)
Sound Mute
■Press the remote controller MUTE button to mute the sound temporarily.
•When you press the button, [MUTE] (pink) and the status of volume setting will be displayed in a guidance image.
•While the sound is muted, press the VOLUME- button to turn down the volume.
•While the sound is muted, press the VOLUME+ button to cancel the mute.
•You can also adjust the sound volume setting of the mute via the
Sound volume setting
Remote
controller
MUTE
MUTE | : 30 |
(The display will turn to pink.)
■Press the remote controller MUTE button once again and the mute will be canceled and the guidance will change to VOLUME (blue), enabling the volume to be heard.
•When MUTE is used, the guide display will continue for 5 sec. and then turn off.
10