Tuning with channel numbers Enter the SETUP menu by pressing the blue button.
Press the OK/Z button to enter the OK/Z CHANNEL row.
Use the OK/Z button to select “S” for cable channels and “C” for terrestrial broadcast.
Use Volume up button to select the channel number buttons.
Use the Program down button to select AUTOPROGRAM and
press the OK/Z button. A list of OK/Z countries will appear. Select
the desired country using Program and Volume buttons.
OK/Z When you are sure the aerial is connected properly press the OK/Z button. Autoprogam will start.
Enter the channel number using the Numeric buttons.
MENU | To cancel Autoprogram whilst it | |
isworking press the Menubutton. | ||
|
OK/Z
Press the Program down/up
buttons to exit the channel row.
Your TV is now tuned and ready to use.
9
Use the Program down button to select PROGRAM NO.
Use the Volume up/down buttons to select the program number.
Use the Program down button to
select STORE. Press theOK /Z
button and STORED will appear OK/Z on the STORE line.
You have now stored the first channel.
Use the Program up button to select again SEARCH and continue the tuning procedure until you have tuned in all the programmes you want or the television can receive.
TV/TX | To exit the SETUP menu press the | |
TV/TX button. | ||
|
Automatic tuning (Autoprogram) Enter the SETUP menu as before.
| SETUP |
CHANNEL | S 07 |
SYSTEM | BG |
FINE TUNE | 0 |
SEARCH | < > |
AUTOPROGRAM | OFF |
CHILD LOCK | |
PROGRAM NO | P1 |
STORE
C/S
BACK
Please note:
If auto sort fails to arrange the programmes in the required sequence please refer to programme table.
Fine tuning
Although the search and Autoprogram will automatically try and tune to the best reception, in areas of poor reception a bit of fine tuning may be required.
In the SETUP menu use the Program up/down buttons to select FINE TUNE. Use the Volume up and Volume down buttons to fine tune.
When you have finished use the Program down button to select
OK/Z STORE and press the OK/Z button.
Child lock
Childlock switches off the programme you are watching when you select it. All other programmes are unaffected. If you go back to the programme with childlock on you will see a black screen with the OSD showing
“
”. You can lock as many programs as you want.
Press the Volume up button to switch the Child lock on or off.