TV set up
The TV set up is accessed through a menu system.
Once you have stored your set up, this is the set up the TV will default to when you switch it on.
MENU | To enter the MAIN menu press the |
Menu button. | |
| Once in the MAIN menu use the |
| Program up and Program down |
| buttons to select items in the menu |
| and the OK/Z to access sub menus |
OK/Z | or use the coloured fastext buttons |
| for quick access. |
Red button | - SOUND |
Green button | - PICTURE |
Yellow button - PROGRAM TABLE
Blue button | - SETUP |
Pink button | - FEATURES |
MAIN MENU
SOUND
PICTURE
PROGRAM TABLE
SETUP
FEATURES
OK SELECT
EXIT
Please note
If you do not press any buttons for 15 seconds the TV will exit the menu system.
Sound menu (red button)
| SOUND |
VOLUME |
|
BALANCE |
|
SOUND TYPE | MONO |
SOUND MODE | NORMAL |
AVL | ON |
DYNAMIC BASS | ON |
EQUALIZER |
|
STORE |
|
BACK
Select the required item in the menu using the Program up/down buttons and make the changes pressing Volume up/down buttons. Use the OK/Z button to enter EQUALIZER sub menu.
Volume
Sets default volume using the Volume up and down buttons.
To save your settings, select
STOREand press the OK/Zbutton. STOREDwill be displayed. Press the Menu button to go back to the previous menu.
OK/Z
MENU
Balance
Sets the sound balance when the
TVis in stereo mode using the
Volume up and down buttons
| To save your settings, select | 11 |
| STORE and press the OK/Z |
|
OK/Z |
| |
| button. STORED will be displayed. |
|
MENU |
| |
Press the Menu button to go back |
| |
|
|
to the previous menu.
Sound type
This item shows STEREO when receiving stereo transmission and MONO for mono transmissions.
The TV can be produced to receive the NICAM broadcasts as a optional feature.
If the channel you are watching is in Nicam stereo the On Screen Display will show NICAM STEREO for a while.
Please Note
If, while watching a nicam stereo channel, the signal strength drops and the system cannot receive nicam stereo the OSD will show MONO. If the signal strength increases again and nicam stereo can be received again, the OSD will show
NICAM STEREO.