Language, Features Menu Pink button, Tilt Optional

OK/Z

Select BRIGHTNESS, CONTRAST, COLOUR and

SHARPNESS using the Program up/down buttons.

Change the settings with the Volume up/down buttons.

To save your settings, select STORE and press the OK/Z button. STORED will be displayed. Press the Menu button to go back to the previous menu.

You can change the picture type whilst watching the TV using the picture Smart control.

Language

There are many languages available for the On Screen Displays (OSD).

OK/Z	Press the OK/Z button to select the
	language list.
	Press the Program down button to
	page through all the languages and
	OK/Z to select.
OK/Z	OK/Z to select.

Timer: Use Program up and down buttons to select Timer in the features menu. Using the Timer fuction, you can switch to a specific programme at a pre- programmed time or you can turn your TV off at the time you want your TV to be

P-	Press the picture Smart control to
	Press the picture Smart control to
	page through the different picture
	types and select the one you want.

Once you have switched the TV off the picture type will revert to the stored setting.

IMPORTANT NOTE: Your TV has Digital Comb Filter, DLTI (Digital Luminance Transient Improvement) features to improve picture quality. These features are set ON and they can not be changed by the end user.

Features Menu (Pink button)

FEATURES

PIP PROGRAM P18

LANGUAGE

TIMER

TILT

0..9 AV

BACK

PIP Program: You can select the program to be displayed on the

PIP sub-picture by pressing Volume up and down buttons or you can also press the numeric buttons to select the PIP program

AV directly. To select AV input press the AV button repetively.

turned off.

Press OK/Z to access the Timer menu.

TIMER
CLOCK	--:--
ON TIME	--:--
OFF TIME	--:--
PROGRAM No	P1

BACK

Clock: Use the numeric buttons to set the real time.

On Time: Use the numeric buttons to set the time that you want your TV to be turned on (TV should be on stand-by mode).

Off Time: Use the numeric buttons to set the time that you want your TV to be turned off (Stand-by mode).

Program No: Use the numeric buttons to set the programme number that will be shown when you set the On Time.

Tilt (OPTIONAL):

Because of the structure of the picture tubes, your picture can be lost on the corners of the screen depending on the position of your TV, north-south-east-west.

To clear this effect, you can adjust the TILT setting and prevent the picture loss (OPTIONAL).

Language

OK/Z to select.

Features Menu (Pink button)

Clock: Use the numeric buttons to set the real time.

Tilt (OPTIONAL):