Connecting a decoder
Via SCART
Make sure the TV and decoder are both switched off.
Plug one end of the SCART lead (not supplied) into the back of the decoder and the other end into the SCART1 on
the back of the TV.
Switch on the decoder and the TV.
AV | Press the AV button on the remote | |
control to select AV1. | ||
|
22
Plug one end of the RCA lead into the video and audio out sockets on the back of the decoder and plug the other end into the video and audio in sockets on the TV.
Press the AV button repetitively and AV select the AV3 mode by two scart
models or select AV4 mode by three scart models.
Please Note
You can record from one external piece of equipment to another via the TV by connecting the playback to SCART 1 and the recorder to SCART 2 or SCART 3 and selecting AV1. You cannot watch the TV.
You can connect NTSC supported equipment
Via RCA lead (optional)
Make sure the TV and decoder are both switched off.
to the TV via the SCART sockets and adjusting the colour via the PICTURE menu.
Select TINT by using Program down button and use the adjust the colour to Volume up and down buttons.
R
AUDIO OUT
LAV3 
AV1
AV2