
8
AV | Press the AV button again to return | |
to TV. | ||
|
Tuning the television
There are two ways of tuning your television: Manual, where you control the tuning process or
Autoprogram where the television does it all automatically.
Please Note
If the TV is set to a channel with no signal the TV will return to standby after 5 minutes. The time remaining is displayed on the screen last 60 second.
Manual tuning
Tuning the TV is accessed through the SETUP menu.
There are two ways to access the SETUP menu:
In the Setup menu select PROG NO and change to P1 using
the Program down button to select it and the Volume up button to change it.
Starting with Program 1, tune in the first channel as follows:
Use the Program down button to select SEARCH.
Press the Volume up or Volume down button to start the tuning search.
When the search finds a strong channel signal it will stop searching. The picture will appear.
Identify which channel you are watching (BBC 1, ITV 1 etc.) and
OK/Z
Press the blue Setup button. or
Press the Menu button and use the Program down button to select SETUP. Press the OK/Z button to enter the SETUP menu.
decide which program number you want it to be.
Use the Program down button to select PROGRAM NO.
| SETUP |
CHANNEL | S 07 |
SYSTEM | BG |
FINE TUNE | 0 |
SEARCH | < > |
AUTOPROGRAM | OFF |
CHILD LOCK | |
PROGRAM NO | P1 |
STORE |
|
C/S
BACK
Please note
The system will displayed automatically on SYSTEM row i.e.BG, L, I, DK depending the receiving broadcasting system of the country. In some countries the broadcasting system can be both in BG/DK or BG/LL´. Only the TV sets produced with Pal Secam BG/DK or Pal Secam BG/LL´ systems can receive both BG/DK or BG/LL´ broadcasts. In this case the user can select the required SYSTEM using Volume up/down buttons.
Please note
If you do not press any buttons for 15 seconds the TV will exit the menu system.
OK/Z
Use the Volume up/down buttons to select the program number.
Use the Program down button to select Store. Press theOK /Z button and STORED will appear on the STORE line.
You have now stored the first channel.
Use the Program up button to select again SEARCH and continue the tuning procedure until you have tuned in all the programmes you want or the television can receive.