Sharp CD-CH1500 operation manual Listening to the Radio, Auto tuning

Radio

Listening to the Radio

– Listening to the Radio –

1 Press the POWER button to turn the power on.

2 Press the TUNER (BAND) button repeatedly to select the desired frequency band (FM or AM).

3 Press the TUNING (X or W) button to tune in to the desired sta- tion.

Manual tuning:

Press the TUNING (X or W) button as many times as required to tune in to the desired station.

Auto tuning:

When the TUNING (X or W) button is pressed for more than 0.5 seconds, scanning will start automatically and the tuner will stop at the first receivable broadcast station.

Notes:

●When radio interference occurs, auto scan tuning may stop automatically at that point.

●Auto scan tuning will skip weak signal stations.

●To stop the auto tuning, press the TUNING (X or W) button again.

To receive an FM stereo transmission:

Press the ST-MODE button on the remote control to display the “ST” indicator.

●“j” will appear when an FM broadcast is in stereo.

FM stereo mode indicator

FM stereo receiving indicator

●If the FM reception is weak, press the ST-MODE button. The “ST” indicator goes out. The reception changes to monaural, and the sound becomes clearer.

After use:

Press the POWER button to enter the power stand-by mode.

20 ■ Sound Control (See page 14.)