Sharp CD-CH1500 Sleep operation, To use timer and sleep operation together, Advanced Features

■Sleep operation

1 Play back the desired sound source.

2 Press the MENU button.

3 Turn the jog dial to select “SLEEP”. Then press the ENTER button.

To change the sleep time:

While the sleep time is displayed, turn the jog dial.

(Maximum: 2 hours - Minimum: 30 minutes)

4 Press the ENTER button.

5 Your system will enter the power stand-by mode automatically after the preset time has elapsed.

The volume will be turned down 1 minute before the sleep operation finishes.

Note:

Once the sleep time is set, it will remain unchanged until the setting is changed.

To cancel the sleep operation:

Press the POWER button while the sleep timer is set.

To confirm the remaining sleep time:

Perform the above steps 2 - 3.

This time you can also change the sleep time.

■To use timer and sleep operation together

Example: To fall asleep and wake to the same radio station

You can play back the same source only (the function cannot be switched).

1 Set the desired playback or recording time (steps 1 - 8, pages 25 - 26).

2 While playing the desired source, set the sleep time (see left, steps 1 - 4).

1. Timer playback (recording) setting
2. Sleep timer setting		End time
	An interval of 3 minutes
	or more is required.

30 minutes - 2 hours	Desired time
Sleep operation will	Timer playback
automatically stop.	(recording) start time

Advanced Features

– Timer and Sleep Operation –

27