Tape Playback
Listening to a Cassette Tape
– Listening to a Cassette Tape –
1 Press the POWER button to turn the power on.
2 Press the TAPE button.
3 Open the cassette door by pushing the area marked “PUSH EJECT 7”.
PUSH EJECT 7
4 Load a cassette into the compartment with side A facing you.
5 Press the REVERSE MODE button to choose one side or both sides.
... To listen to both sides.
... For repeat play of both sides.
... To listen to one side.
6 Press the 06 button to listen to side A, or the 1 button for side B.
●To play both sides ( 
), start from side A. When playback starts from side B, side A will not be played.
●To play side B using the remote control, press the ■ button to switch the playback side. Then, press the 06/1 0 button.
To stop playback:
Press the ■ button.
Fast forward/rewind on side A:
To advance the tape, press the 2 button.
To rewind it, press the 3 button.
Fast forward/rewind on side B:
To advance the tape, press the 3 button.
To rewind it, press the 2 button.
Caution:
●To remove the cassette, press the ■ button, and then open the compartment.
●If a power failure occurs during tape operation, the tape head will remain engaged with the tape and the cassette door will not open. Wait until the power is restored.
●Even if the 06 button is pressed during tape playback, the unit will not enter the pause mode.
22 | ■ Sound Control (See page 14.) |
