General Control, Basic Operation | Sharp CD-CH1500 specs

General Control

■ Demonstration mode

The first time the unit is plugged, the unit will enter the demonstration mode. You will see words scroll.

To cancel the demonstration mode:

When the unit is in the power stand-by mode (demonstration mode), press the DEMO button. The unit will enter the low power consumption mode.

To return to the demonstration mode:

When the unit is in the power stand-by mode, press the DEMO button again.

■ Opening and closing the control panel

The control panel is motorized.

The control panel automatically opens when the power is turned on, and closes when the unit is set to the power stand-by mode.

When the power is turned on, you can open or close the control panel by pressing the control panel open/close 7 button.

Caution:

● Do not push the control panel while it is opening or closing.

● Do not press buttons on the control panel strongly. The hinge of the panel may be broken.

● Be careful not to jam your fingers in the control panel.

■ Display brightness (2 levels)

You can switch the display brightness by pressing the DIMMER button.

DIMMER OFF

DIMMER ON

Basic Operation

– General Control –

13

Image 13

Sharp CD-CH1500 General Control, Basic Operation, Demonstration mode, Opening and closing the control panel

Contents

CD-CH1500 Special Notes Explanation of Graphical SymbolsImportant Instruction Special Notes Important Safeguards Important Safeguards Accessories Contents Volume control PrecautionsGeneral Care of compact discs Controls and Indicators Controls and IndicatorsFront panel Rear panel Multi-function LCD displayFM/AM Antenna Jack Auxiliary Input Jacks Remote control Woofer Subwoofer Terminals Tweeter Speaker systemSubwoofer Bass Reflex Duct Main Speaker Terminals Preparation for Use System ConnectionsSystem Connections AM loop antenna Remove the transport screw Connecting the AC power cordSpeaker connection FM/AM loop antenna connection Battery installation Remote ControlTest of the remote control Remote Control General Control Demonstration modeBasic Operation Opening and closing the control panel Bass control Sound ControlEqualizer Sound Control Operation Setting the ClockBasic Clock CD Playback Listening to a CD CDsListening to a CD CDs To locate the desired portion To locate the beginning of a track To specify a disc to Play Switching the time displayRepeat or Random Play Advanced CD Playback Programmed Play Programmed Play Listening to the Radio Auto tuningRadio Listening to the Radio Listening to the memorized station To scan the preset stationsMemorizing a station To recall a memorized station Tape Playback Listening to a Cassette TapeListening to a Cassette Tape Fast forward/rewind on side a Recording Recording from a CDRecording from a CD Erasing recorded tapes Recording from the RadioRecording from the Radio To interrupt recording Advanced Features Timer and Sleep OperationTimer playback or Timer recording Timer and Sleep Operation When the timer end time is reached, the system will enter To check the setting timePower stand-by mode automatically Adjust the volume using the Volume buttons To cancel the sleep operation To use timer and sleep operation togetherSleep operation To confirm the remaining sleep time Enhancing Your Stereo System FeaturesAdvanced References Troubleshooting Chart Maintenance Specifications SpecificationsAmplifier Speaker Sharp Electronics Corporation