Sharp CD-CH1500 Enhancing Your Stereo System, Features, Advanced, DVD, etc, To record on a tape

Features

Stereo System –

Enhancing Your Stereo System
The connection cord is not included.	■ Listening to the playback sounds from VCR,
Purchase a commercially available cord as shown below.
	DVD, etc.
	1. Use a connection cable to connect the unit to the AUX IN jacks.
	When using video equipment, connect the audio output to this unit and the video
	output to a television.
	2. Press the POWER button to turn the power on.
	3. Press the AUX button to select “AUX”.
	4. Operate the VCR, DVD, etc.
Red	5. Adjust the input level from VCR, DVD, etc. using the 3 or 2 button.
	White
	The “OVER” indicator should not light at the maximum level.
	–2	0	+4
White
	VCR, DVD, etc.
	Note:
	To prevent hum interference, place this unit away from a television.

Advanced

– Enhancing Your

RCA cord	To the line output jack
	Red

■To record on a tape

1. Insert a cassette in the cassette compartment.

2. Press the AUX button to select “AUX”.

3. Press the REC PAUSE I6 button.

4. Operate the VCR, DVD, etc.

5. Adjust the input level from VCR, DVD, etc. using the 3 or 2 button. The “OVER” indicator should not light at the maximum level.

–2 0 +4

6. Press the 06 button to record on side A, or the 1 button for side B.

■Headphones

●Before plugging in or unplugging the headphones, reduce the volume.

●Be sure your headphones have a 1/8" (3.5 mm) diameter plug and are between 16 ohms and 50 ohms impedance. The recommended impedance is 32 ohms.

●Plugging in the headphones disconnects the speakers automatically. Adjust the volume using the VOLUME buttons.

28