Nortel Networks ICS 4.1 Remote pkg, Call log pswds, Log pswd, Programing pswds, Installer, Basic

Page 64

••• Remote pkg	Select whether a Class of Service password will use the default remote package or a different
	remote package (enter the two-digit remote package number).
• Call log pswds	A programming section that allows you to clear any Call Log password programmed with the
	Call Log feature.
•• Show set:_	Enter the DN of the telephone you want to program.
••• Log pswd	Erase the call log password for this telephone.
• Programing pswds	In this section you can create your own programming password rather than use the default.
•• Installer	Enter the new installer password which gives you access all the programming settings.
•• SysCoord+	Enter the new system coordinator password which gives you access to selected programming
	settings.
•• Sys coord	Enter the new system coordinator password which gives you access to everyday programming
	settings.
•• Basic	Enter the new basic password which gives you access to the most commonly used programming
	settings.
• IRAD pswd	View or change the password used for remote programming.
• Hospitality	A programming section that allows to create Hospitality services passwords if required, rather
	than use the defaults.
•• Desk pswd	Enter the new Desk password which gives access to all Hospitality services programming
	settings.
•• Cond pswd	Enter a Condition password which gives certain employees access to the Room condition
	programming settings in Hospitality services.
Time&Date	A programming section that lets you set the system's clock to the correct time and date.
System prgrming	A programming section that lets you change system-wide settings, Auto Attendant, and CCR
	programming
• Hunt groups	A programming section that lets you set up incoming calls on a specific DN to be routed to a
	group of sets.
•• Show group:_	Enter the DN of the telephone you want to program.
••• Member DNs	Enter the DN of the telephone you want to add to the group.
•• Line assignment	Allows you to assign or unassign a line to a particular hunt group.
•• Mode:	Allows you to determine how an incoming call will be handled by the hunt group.
•• Hunt delay:	Select a delay value to determine how long a set rings before the call moves on the next member
	set.
•• If busy:	Allows you to determine how an incoming call is to be treated when all hunt group member sets
	are busy.
•• Q Timeout:	Allows you to set the number of seconds the incoming call remains in the hunt group call queue
	before it is offered to the overflow position.
•• Overflow:	Enter the DN of the set you want the hunt group overflow calls to be presented.
• Change DNs	Change the DN of a telephone. All DNs must be the same length. The first digit of a new DN
	cannot be the same as the external line access code, the Call Park prefix, the Direct-dial digit,
	or the first digit of a line pool access code. If you change an individual DN, you must quit
	programming for the change to take effect. If you have additional programming to do, quit and
	then begin a new programming session.
• Featr settings	Programming for features that are used system-wide.

Compact ICS 4.1 Programming Record P0906186 Issue 02