| Page 59 |
|
|
••• Show line:_ | Enter the number of the line for which the telephone will log Call Display information. |
|
|
•••• Caller ID set | Select whether the telephone displays the Call Display information when a call is ringing on the |
| specified external line. |
|
|
•••• Call log set | Select whether the telephone will automatically log Call Display information for calls on the |
| specified external line. |
|
|
•••• Extl VMsg set | Select whether this telephone will display a message indicator provided to the specified line by |
| an external voice message service. |
|
|
••• 1stDisplay | Select call information to be displayed first: name of caller, number of caller, or name of line in |
| your Norstar system that the call is on. |
|
|
••• Log space | Allocate a number of Call log spaces from a |
|
|
•••• Log: Pool: | Assign this telephone its log spaces. |
|
|
Lines | A programming section that lets you assign settings to each line. |
|
|
Show line:_ | Enter the line number of the line you want to program. |
|
|
• Trunk/Line data | The programming section that lets you program settings for physical lines and target lines that |
| affect how the line is used by the Norstar system. |
|
|
•• Trunk type | The trunk type is determined by the cartridge or card installed in the slot. |
|
|
•• Line type | Select how a line will be used by telephones in the system. Choose Public to be able to assign |
| the line to any telephone. Choose Private to make the line private to a telephone. Enter the DN |
| of the telephone you want to assign the line. Choose Pool to place the line in a line pool (A to C). |
|
|
•• Rec’d # | Enter the Received number for this target line. When the system automatically answers an |
| incoming call on |
| the Rec’d # length setting, matches these digits to a Received number, and routes the call to the |
| appropriate target line. A Received number cannot be the same as, or be the start digits of a |
| line pool access code, a destination code, the DISA DN, or the Auto DN. |
|
|
•• Dial mode | Select the appropriate dial mode for the line. The dial mode you select here must match the dial |
| mode setting of the line at the central office (the public network). The default is tone. This setting |
| does not appear for target lines. |
|
|
•• PrimeSet | Enter the DN of a prime telephone as a backup to answer calls on this line. |
|
|
•• Auto privacy | Select whether a line will be private to the individual on a call, or whether it can be shared by |
| other users while a call is in progress. The Privacy setting can be suspended for individual calls |
| using the privacy feature (Ä¡Ü). |
|
|
•• Trunk mode | Select whether the line operates with disconnect supervision. Auto answer and DISA lines must |
| be supervised. This setting does not appear for target lines. |
|
|
•• Ans mode | Select whether the line will be answered manually (normal call answering method) or |
| automatically by the system. Auto answer allows remote access to your Norstar system. This |
| setting only appears if Trunk mode is supervised. |
|
|
•• Ans with DISA | Select whether a line programmed for auto answer will be answered with Direct Inward System |
| Access (DISA) or with system dial tone. This setting only appears if Ans mode is Auto. This |
| setting does not appear for target lines. |
|
|
•• Aux. ringer | Select whether an auxiliary ringer (if installed) will ring for incoming calls on this specific line. |
|
|
•• Full AutoHold | Select whether an idle line will be put on hold when another line is selected. This setting does |
| not appear for target lines. |
|
|
•• LossPkg | Select the appropriate loss/gain and impedance package for analog loop lines only. Select the |
| package based on the terminating switch type (PBX or CO) and the distance from the switch |
| (Short, Medium, or Long). This setting only appears if the line is on a loopstart cartridge. It does |
| not appear for target lines. |
|
|
P0906186 Issue 02 | Compact ICS 4.1 Programming Record |