Sound mode
You can select NORMAL, SPATIAL or
DOLBY VIRTUAL (optional)using the
Volume up/down buttons or mix button.
SPATIAL sound is an ‘expanded stereo’. It gives the impression that the two speakers in the TV are further apart than they really are.
DOLBY VIRTUAL is based on Dolby Pro Logic decoding for production of the Left, Right, Centre and Virtual Surround Sound channels using two loudspeaker.
Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the
12
Please Note
To get the surround effects in Dolby Virtual mode, you must apply a Dolby Surround encoded input to the TV.
You can’t adjust the AVL and EQUALIZER in DOLBY VIRTUAL mode.
OK/Z | To save your settings, select STORE |
MENU | and press theOK/Z button. STORED |
will be displayed. Press the Menu | |
| button to go back to the previous |
| menu. |
AVL
TV transmitters have different sound levels. AVL (automatic volume limiting) maintains the same sound level as you switch from program to program.
To supply this press Volume up or down button and select ON for AVL.
OK/Z | To save your settings, select STORE |
MENU | and press theOK/Z button. STORED |
will be displayed. Press the Menu | |
| button to go back to the previous |
| menu. |
Dynamic Bass (optional)
Set DYNAMIC BASS to ON if you
wish to deepen the bass sound specifically.
Subwoofer (optional)
A sub woofer speaker can be fitted within the TV case as an option depending to the model.
For 33”(84cm) TV sets there
is an external subwoofer (optional) to be fixed as shown below.
R
AUDIO OUT
L
AV3
AV1
AV2
Select Sound menu and press Program down button to access subwoofer.
Press the Volume up button to switch the Subwoofer on or off.
Please Note
If you move the loudspeaker switch, on the rear of the TV, to the external position, the internal speakers in the TV will be switched off but the Subwoofer will remain on if switched on.