Operating additional equipment
Programming the timer with the timer overview
A timer recording can also be programmed manually.
Call Timer list.
You see a list of all previously programmed timers:
Timer list |
|
| Mon 31.07./11:28 |
|
Mon 14.09. | Das Erste | Brisant |
| |
Wed 16.09. | ZDF |
| ||
Thu 22.09. | 3sat | wissen spezial |
| |
|
|
|
| |
| New recording | Change | END | |
|
|
| Delete | INFO |
Green button: Change timer recording. |
| |||
Yellow button: Delete timer recording. |
| |||
Red button: | New timer recording. |
| ||
Programming the timer manually
➠The timer list is open.
Red button: Call the recording wizard.
Recording wizard |
|
| INFO | END |
Via EPG | OK | Via teletext | Manual |
|
34Select Manual,
OK call Station selection.
34 Select station.
OK calls the Timer data.
For timer data input, see page 54.
After confirming the timer data, the new recording is transferred to the timer overview.
Explanation of the setting possibilities of the recording wizard:
Via EPG Timer programming via EPG (see Programming a timer recording with the EPG, page 54).
Via Teletext Timer programming via Teletext (see Programming a timer recording via Teletext, page 54).
Manual Programming timer manually (see above).
Timer recording with external devices
➠It is not possible to record HDTV broadcasts with external devices. Use the internal Digital Recorder for this.
Recorder with Digital Link Plus
If you use an externally connected recorder with Digital Link Plus or a similar system, the TV set and connected recorder exchange data (e.g. compare station lists TV set/recorder or timer data of analogue stations).
Please consult the operating manual of your recorder to find out if your recorder is Digital Link Plus compatible. In addition use only Euro AV cables for the connection between TV set and recorder.
Analogue stations
The timer data are transmitted automatically from the TV set to the recorder after programming is complete. (For DVD recorders in addition the recording quality SQ or EQ is also transmitted.)
The recording then is controlled by the recorder and the recorder tuner is used for reception of the programme.
The recording data are not saved in the timer overview of the TV set. Consequently if you want to change or delete the timer data then you must do so on the recorder.
Digital stations
If you want to record digital stations with an externally connected recorder, then the DVB tuner is used and the TV device takes over control of the recorder. Then the station on the TV set is locked during the timer recording. It is not possible to switch over to another DVB station.
Recorder without Digital Link Plus
If the programmed timer cannot be transmitted to the external recorder (no Digital Link Plus) but supports Digital Link
Digital Link must be switched on on the recorder. Read the operating instructions of your Loewe recorder.
In addition use only Euro AV cables for the connection between TV set and recorder.
Analogue and digital stations
You can control the recording from the TV set. The recorder must be set manually to the AV input, to which the TV device is connected. Then the station on the TV set is locked during the timer recording. It is not possible to switch over to another station.
Copy protection
55 - 