Loewe 52 manual Software update

Page 36

DVB

Software update

TV base software and DVB software

Your TV set provides the option to update the TV basic and DVB soft- ware. The current software versions can be installed on your set with a USB stick.

Contact your dealer for a software update by USB stick.

The software can also be updated by different DVB reception paths (DVB- T, DVB-C, DVB-S).

However, the prerequisite for this is that the software is provided by the appropriate DVB reception path.

This may differ depending on the TV set and the DVB program pro- vided.

Ask your local dealer for information whether a software update via DVB reception path is possible.

Automatic information by new software version

In the Change update settings menu (see right column) you can determine via which DVB reception path (if possible) you want to receive updates.

Your TV set determines automatically overnight whether a new software version is available via the selected DVB reception path. The TV set must be left in the standby mode for this (do not switch off with the mains switch).

If a new software version is available, the TV set informs you of this in an on-screen message the next time it is switched on (see page 37 – Loading new software).

Manual search for new software

If it is not displayed automatically that a new software is available when you switch on the set, you can also search for one manually. The search depends on the selected update source(s).

Call TV menu.

34Select Settings,

6 go to the menu line below.

34Select Miscellaneous,

6go to the menu line below.

34Select Software update.

OK Open the software update wizard.

The current update settings are displayed in the info text.

Software update wizard

The software update can be made via a USB stick or DVB antenna. If you do not make any changes, your TV makes it with the following settings:

Update source

 

USB and satellite: ASTRA1 19,2°E (DVB-S)

 

 

 

(ASTRA1 19,2°E)

Frequency

 

12603 MHz

Symbol rate

 

22000

 

Band

 

horiz/high

 

 

 

 

 

 

TV menu

 

 

 

 

Settings

 

 

 

 

Miscellaneous

 

 

END

 

 

 

 

 

 

 

 

 

 

Software update

 

 

 

 

 

 

 

 

 

Start update

OK

Change update settings

 

If you want to change the update settings:

34Select Change update settings,

OK the wizard polls the update settings.

➠The selection options depend on the antenna cables connected at the initial installation (see page 12).

USB only

New software is searched for via USB.

USB and DVB-T

New software is searched for first via USB then via DVB-T (digital terrestrial transmission).

USB and DVB-C

New software is searched for first via USB then via DVB-C (digital cable transmission).

USB and satellite

New software is searched for first via USB then via DVB-S (digital satellite transmission). The name of the currently selected satellite is displayed.

Setting parameters of the different DVB update sources:

Channel Select the channel on which the new software is pro- vided.

Frequency Enter the frequency of the station to be transmitted directly.

Bandwidth Is preset automatically depending on the selected chan- nel.

Symbol rate Enter the symbol rate of the station to be transmitted directly.

QAM Set the suitable type of modulation. modulation

Band Set the transmission range for satellite reception.

- 36

continued on the next page Ž

Page 35 Page 37
Image 36
Page 35 Page 37
Contents Operating instructions Contents Remote control TV functions Control unit front side of the device Factory settings Connections rear side of the device ComposeAV1 DVD player AV2 DVD recorder Connections rear side of the device Compose 46 / Compose USB connectionVideo in AVS For camcorderWelcome Operating convenience with wizards Wizards in overviewInfo display and TV index For your safety Power supplyAir circulation and high temperatures Proper use and environmental conditionsEnvironmental protection Initial installation Installing the TV setPreparing the remote control unit Connecting the TV setFirst installation wizard Turning the set on/offExplanations of the setting possibilities Antenna/cable analogue analogue stations viaDVB-S cable Explanation of the setting possibilities Positioning/aligning DVB-T antennaExplanations of the DVB-T antenna Call TV menuOperating convenience General information on menu operationInfo display Index in the TV set Assist+ menuTV menu Overview diagram Radio menu Overview diagramDaily operation Select stationSelect video source With the favourites listsExplanation of the favourites lists Explanation of the icons following station namesAdjusting the sound Adjusting the picture Operation without remote controlButton functions Explanations of the symbols for sound identification Other setting options for DVB stationsStatus display Additional selection possibilities for DVB stationsSearch/update stations Search wizard Explanations of some search settingsManaging stations TV stationsSearch/update station manual search Call TV menu StationInput of the station colour standard PAL, SECAM, NTSC-V, PAL60, AutomChange, delete, move, rename, restore stations Restore stationsGreen button Starts Restore stations Delete station Red button Starts Delete stationPut together / change favourites lists Picture in Picture Picture in Picture PIPConfigure Picture in Picture PIP mode Electronic Programme Guide Electronic Programme Guide EPGConfiguring EPG Teletext Teletext Teletext menu Digital teletext MHEG-5Radio mode RadioConditional Access module CA module Software update 34Select Start update OK Start Software updateTV base software or DVB software Loading new softwareOther settings Timer functionsParental lock On-screen displays Time and dateCall On-screen displays Call time and dateOperating additional equipment Connection wizardSignal type PlaybackDigital Link Plus ImmediateConnecting a DVD player to the TV set 56Select DVD, OK switch overPlayback from AV device AV input can also be called manually, howeverConnecting a DVD recorder to the TV set Connecting Camcorder/cameraCamcorder Playback from AV device Call AV selectionDevices to the Hdmi DVI connections Devices to the PC in connection Devices to the Component in connection Sound components wizard TV speakersIntegrated Dolby Digital Decoder Setup ConnectingSetup example for Loewe Individual Sound Adjusting the speaker system 34Select Configuration/modification OK continue to Adjust speaker level OK continue to Subwoofer phaseOK continue to set Distance to left front speakerConnecting audio amplifiers Connecting digital audio amplifiersConnecting analogue audio amplifiers Mark the HiFi/AV amplifierAssignment of the digital audio input Audio connection in Hdmi DVI devicesRS-232C interface Direct way to record Timer recording with external devices PhotoViewer Open folder Marking photos for slide showStarting a slide show Calling the PhotoViewer menuMusicBox ConnectionStarting the MusicBox Select/play musicMusicBox Browse/sort MusicBox Play lists Call / play play listCreate new play list / add title Blue button Call Create play listMusicBox Menu Operating Loewe equipment Functions for the Loewe DVD player Auro 2216 PS, 8116 DT User interface of loaded DVD Menu original / playlistCard Reader operation ViewVision DR+ „Home menu Rotating the TV set Troubleshooting With Teletext various character sets are AmplifierTechnical data General dataElectrical data Connections max. equipmentAccessories AccessoriesSetup possibilities Individual 52 Compose Full-HD+100Individual 46 Compose Full-HD+100 Individual 40 Compose Full-HD+100Conditional Access module See CA module GlossaryCinch cable Cable for transmitting audio or video CI slot See Common InterfacePicture in Picture See PIP TV analogue TV digitalHD analogue HD digitalIndex Service
Top Page Image Contents