Software update

DVB

TV base software and DVB software

Your TV set provides the option to update the TV basic and DVB soft- ware. The current software versions can be installed on your set with a USB stick.

Contact your dealer for a software update by USB stick.

The software can also be updated by different DVB reception paths (DVB- T, DVB-C, DVB-S).

However, the prerequisite for this is that the software is provided by the appropriate DVB reception path.

This may differ depending on the TV set and the DVB program pro- vided.

Ask your local dealer for information whether a software update via DVB reception path is possible.

Automatic information by new software version

In the Change update settings menu (see right column) you can determine via which DVB reception path (if possible) you want to receive updates.

Your TV set determines automatically overnight whether a new software version is available via the selected DVB reception path. The TV set must be left in the standby mode for this (do not switch off with the mains switch).

If a new software version is available, the TV set informs you of this in an on-screen message the next time it is switched on (see page 37 – Loading new software).

Manual search for new software

If it is not displayed automatically that a new software is available when you switch on the set, you can also search for one manually. The search depends on the selected update source(s).

Call TV menu.

34Select Settings,

6 go to the menu line below.

34Select Miscellaneous,

6go to the menu line below.

34Select Software update.

OK Open the software update wizard.

The current update settings are displayed in the info text.

Software update wizard

The software update can be made via a USB stick or DVB antenna. If you do not make any changes, your TV makes it with the following settings:

Update source			USB and satellite: ASTRA1 19,2°E (DVB-S)
			(ASTRA1 19,2°E)
Frequency			12603 MHz
Symbol rate			22000
Band			horiz/high

	TV menu
	Settings
	Miscellaneous			END
				END

	Software update

	Start update	OK	Change update settings

If you want to change the update settings:

34Select Change update settings,

OK the wizard polls the update settings.

➠The selection options depend on the antenna cables connected at the initial installation (see page 11).

USB only

New software is searched for via USB.

USB and DVB-T

New software is searched for first via USB then via DVB-T (digital terrestrial transmission).

USB and DVB-C

New software is searched for first via USB then via DVB-C (digital cable transmission).

USB and satellite

New software is searched for first via USB then via DVB-S (digital satellite transmission). The name of the currently selected satellite is displayed.

Setting parameters of the different DVB update sources:

Channel Select the channel on which the new software is pro- vided.

Frequency Enter the frequency of the station to be transmitted directly.

Bandwidth Is preset automatically depending on the selected channel.

Symbol rate Enter the symbol rate of the station to be transmitted directly.

QAM Set the suitable type of modulation. modulation

Band Set the transmission range for satellite reception.

continued on the next page

- 36