Loewe R 37 Full-HD+ 100, R 37 HD+ 100 Devices to the Component in connection

Operating additional equipment

Devices to the Component IN connection

DVD players/recorders or a Set-Top-Box with Component Video connections can also be connected to the Cb/Pb Cr/Pr Y sockets (SD/HD-COMPONENT) of the TV set instead

of to the EURO-AV sockets.

The connecting cable with three cinch plugs each transfers the picture information with a better quality than a EURO-AV cable. You need another cable for the sound transmission.

Connecting the device

➠Device to COMP. IN is registered with the connection wizard.

Switch off all equipment before connecting.

Connect the Component Video outputs of the external device by a triple cinch cable to the Cb/Pb Cr/Pr Y sockets of the TV set.

Connect the analogue audio outputs of the external device to the AUDIO IN1 L/R sockets of the TV set by a dual cinch cable.

TV set

Connection example of a Set-Top-Box

AUDIO IN1 L/R Cb/Pb Cr/Pr Y

Set-Top-Box with

COMPONENT OUT

Alternatively, connect the digital audio output of the exter- nal device to the AUDIO DIGITAL IN socket of the TV set with a cinch cable.

The digital audio input can be assigned to the COMP. IN socket by TV menu →Connections →Miscellaneous →Assign digital audio input, see page 53.

Playback from the device

Call AV selection.

AV selection
COMP. IN	OK
HDMI2/DVI
HDMI1/DVI
PC IN
AVS
DVD-REC
DVD	END
VIDEO
OK Switch to ...

56Select COMP. IN socket, OK switch over.

Adapt geometry (only possible with certain signals)

This can be used to position the picture correctly and move the position of the picture (horizontally and vertically) so that it fills out the whole screen.

Call TV menu.

34Select Geometry,

6 go to the menu line below.

34Select the desired setting,

6go to the menu line below.

34Make settings.

- 46