Loewe R 37 Full-HD+ 100, R 37 HD+ 100 operating instructions Devices to the PC in connection

Operating additional equipment

Devices to the PC IN connection

You can connect a PC to the PC IN socket for example and thus use the TV screen as a monitor.

➠When connecting a PC or accessory equipment to the PC IN socket of the TV set, set one of the following screen resolutions on the PC / accessory equipment first.

800 x 600	60 Hz	(SVGA)	1024 x 768	60 Hz	(XGA)
1280 x 1024	60 Hz	(SXGA)	1360 x 768	60 Hz	(WXGA)
720 x 576i		(SDTV)	720 x 480i		(SDTV)
720 x 576p		(SDTV)	720 x 480p		(SDTV)
1280 x 720p		(HDTV)	1920 x 1080i		(HDTV)

Connecting the device

➠There is no need to register the device with the connec- tion wizard.

Switch off all equipment before connecting.

Connect the device to the TV set’s PC IN socket with a VGA cable.

Connect the analogue audio signal of the PC to the AUDIO IN2 jack on the TV set with a stereo cable.

TV set

Connection example of a

PC

PC IN AUDIO IN2

PC

DIG-OUT MIC IN OUT

Alternatively, connect the digital audio output of the PC or accessory equipment to the AUDIO DIGITAL IN socket of the TV set with a cinch cable.

The digital audio input can be assigned to the PC IN socket by TV menu → Connections → Miscellaneous → Assign digital audio input, see page 53.

Playback from the device

Call AV selection.

AV selection

COMP. IN

HDMI2/DVI
HDMI1/DVI
PC IN	OK
AVS
DVD-REC
DVD	END
VIDEO
OK Switch to ...

56Select PC IN socket, OK switch over.

Adapt geometry (only possible with certain signals)

This can be used to position the picture correctly and move the position of the picture (horizontally and vertically) so that it fills out the whole screen.

Call TV menu.

34Select Geometry,

6 go to the menu line below.

34Select the desired setting,

6go to the menu line below.

34Make settings.

Set colour standard (only possible with certain signals) Call TV menu.

34Select Picture,

6 go to the menu line below.

34Select and set Colour standard:

RGB or Ycc / Ypp

The colours will not be shown correctly if the wrong standard is set.

45 -