Loewe R 26, R 32, R 37 Using the common interface module, Handling the fabric hose, Switching on

Page 12
Contact side

First installation

If the reception conditions are good, then a room antenna may be used for DVB-T. Passive and active room antennas are available on the market. The power is supplied for an active antenna via the antenna connection. For automatic programming or in "TV Menu – Connections – Antenna DVB – Antenna DVB-T," the distribution voltage (5 volts) is to be set correspondingly. It may be practical to use a nondirectional antenna. If the location is outside the normal transmitting range, then a unidirectional antenna may also be used to improve the reception quality.

You can find out more on the digital stations that can be received in your area at your specialist dealer.

If a Spheros R32/37 was retrofitted with a PIP tuner or if this is already integrated in a set with a digital recorder. The PIP tuner output has to be connected with the ANT-TV socket (Tuner 1). See illustration on page 7.

If a Digital Satellite Tuner 1 has been retrofitted, connect your satellite antenna system to the ANT-SAT socket.

If a Digital Satellite Tuner 2 has been retrofitted (only in conjunction with the Digital Recorder+), then connect one antenna cable each, for example from the

Using the common interface module

(only for sets with CI slot)

In order to be able to receive encrypted digital stations, the common interface module (CI module) and the smartcard both have to be inserted into the corresponding slot of your TV set. You can purchase the CI module and smartcard at your specialist dealer. You can find the slot on the back of your TV set, see the illustration on pages 6/7.

1.Make sure the TV set is switched off with the mains switch on the set, or pull the mains plugs.

2.First push the smartcard into the CI module as far as it will go. Insert it so that the side with the golden

contact chip faces the side of the module printed with the supplier‘s brand logo.

Printed arrows indicate how to insert the card. Also follow the installation instructions included with the smartcard.

antenna switch or from the twin LNC, to both SAT sockets.

When laying the cable, use the cable clips affixed beneath the TV set. Replace the connection cover on the TV set.

Handling the fabric hose

Use the fabric hose included to lay the mains cables, antenna cables or cables from other electronic components systematically; then

3.Slide the CI module (1 carefully into the slot with the contact side facing the front. The logo on the common interface module should be visible.

Make sure the module is not twisted in the process. Do not use force.

When the module locks, the eject button is pressed outwards.

(1 The CI module and the smartcard are not included in the scope of delivery for this set; you can usually obtain them at your specialist dealer.

Eject button

 

INTERFACE

CI module

COMMON

 

lead the hose with the cables to the connection boxes. This provides you with an elegant solution when laying cables.

The diameter of the fabric hose increases when you push it together lengthwise (see illustration). This makes it easier for you to push through cables with plugs.

Switching on

Press the mains switch (for Spheros R 37, the set switches on immediately, the green indicator lamp lights up).

For Spheros R 26/32:

The red indicator on the set now lights up (standby mode).

Switch on the set using the switch integrated in the indicator (for further operating options see page 14).

- 12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Operating instructions Contents Remote control TV functions Digital RecorderOpen index Control units Spheros R 26 and R Control unit Spheros R Connections to rear panel Spheros R Connections to rear panel Spheros R 32 and R Welcome Cleaning DisposalPacking and box SetFor your safety This equipment must Only be connected toWhich has the same Rating plate useFirst installation Remote controlConnection Using the common interface module Switching onAntenna switch or from the twin LNC, to both SAT sockets Handling the fabric hoseAutomatic programming Station sortingFirst installation Daily operation Switching on/offDirecting DVB-T antenna Select a TV channelWith the P+/P- buttons on the remote control With the numeric buttons of the remote controlChanging stations Via the station listBasics about the menu operation Example of the menu operationOKSelect Settings For the info systemThis is how to select the index item For the indexControl like on a mobile phone keypad Use To go to the previous/next letterSetting the sound Picture settingsDirect control on TV set How the coloured keys work in TV mode Operating modes TVShow status display Calling the indexCall timer overview Under Settings you will find the following functionsCall additional functions Select picture formatDVB subtitles Installing new DVB software Removing the CI moduleInserting a new CI module Calling the CI module menuImage+ demo mode Image+Image+ menu Operating modes PIP Picture in picture PIPSetting the PIP type Switch to small PIPFunctions in the PIP menu Position of the PIP pictureUsing the EPG Mark this by using OKOperating modes EPG EPG Programme guideSwitch on TV when marked Programming recording for recordersEPG menu Selecting providers and stationsOperating modes Teletext Analogue TeletextSelection with the coloured keys Displaying teletext pagesProgramme timer recordings Teletext menuDigital teletext operation only for UK device version Menu Display teletext menuOperating modes Radio RadioRadio menu EPG Programme guideLogin and connect equipment Connecting video/DVD recordersOperating additional equipment Video playback Calling AV input via the station listCalling AV inputs in the AV selection AV Call AV selection Now you will see the playback from the connected AV deviceAssignment of digital audio inputs and outputs Audio input Audio DigitalAudio output Audio Digital OUT Digital audio only required for TV as centre loud speaker Component Video EURO-AV cableLink cable Six pin Cinch Cubic plug cableConnecting other audio amplifiers or active speakers Sound menu using the button, select Sound via and then TVSetting colour standard Hdmi DVI connectionVGA/XGA connection Set geometryComponent video connection Sound from PC or Set Top BoxSelect COMP. in sockets and use Setting the remote control using code entry Using the RC3 remote control to operate a VCR Functions for Loewe VCR VV 8106, 8136Setting the position of the TV set when switched off Select SettingsRotating the TV set for Spheros R 32/37 Problem Possible cause Remedy What to do, ifWired Digital Link Plus does not functionReplace the Euro-AV cable That they fall between 1Technical data General dataElectrical data ConnectionsAccessories Service Addresses SwitzerlandCodelist RC3 / Lista de códigos RC3 LoeweVCR SAT /STB SAT Cable Box STB TPS

R 32, R 26, R 37 specifications

Loewe, a renowned name in the world of premium audio and visual technology, has introduced an impressive lineup of products with the R 37, R 26, and R 32 models. Each of these models showcases the brand's commitment to high-quality sound, elegant design, and cutting-edge technology, making them suitable for any modern living environment.

The Loewe R 37 is designed for audio enthusiasts who seek rich, immersive sound. A standout feature of the R 37 is its advanced acoustic technology, which is engineered to deliver clear highs and deep lows, resulting in a well-balanced sound profile. The model is equipped with high-end speakers that support various audio formats, ensuring compatibility with modern streaming over Wi-Fi and Bluetooth. With its sleek design and elegant finish, the R 37 can seamlessly blend into any décor, making it not just a piece of technology but also a stylish addition to your home.

Moving on to the R 26, this model is regarded for its compact size without compromising audio quality. Living in smaller spaces doesn't have to mean sacrificing sound performance, and the R 26 excels in producing impressive audio output from its smaller form factor. It incorporates the same high-quality components found in larger models, ensuring that users experience rich sound even in tight quarters. Additionally, the R 26 features intuitive connectivity options, allowing for easy integration with smartphones, tablets, and other devices, enhancing its versatility for everyday use.

The Loewe R 32 takes functionality and design a step further by combining modern technology with user-friendly features. This model comes with an integrated screen that allows for visual feedback and interaction, creating a more engaging experience for users. The R 32 also boasts Smart Home integration capabilities, enabling seamless control through smart devices. Its robust sound performance is complemented by customizable audio settings, allowing users to tailor their listening experiences according to their preferences.

In summary, the Loewe R 37, R 26, and R 32 collectively demonstrate the brand's commitment to craftsmanship and innovation. With stunning designs, superior sound quality, and smart technologies, these models cater to a wide range of audio needs. Whether it’s the immersive experience of the R 37, the compact convenience of the R 26, or the enhanced features of the R 32, Loewe continues to set the standard for excellence in the audio market, ensuring that every listener can enjoy high-fidelity sound in style.
Top Page Image Contents