Loewe R 26, R 32, R 37 manual Setting the remote control using code entry

Page 39

Operating additional equipment

Operating other Loewe devices with the RC3 remote control

Using this remote control, you can operate additional devices from Loewe.

DVD

STB Use the rotary switch to select VCR, TV or a Set Top Box.

 

TV

VCR

The following are preset at the factory: Loewe VCRs, Loewe TV

 

sets and for STBs (Set Top Box) in Germany, the

 

common d-box.

Use the driver buttons in the TV and STB position for VCR, DVD or Digital Recorder

TV

DVD STB

VCR

END

EPG

AV

jkl

def

wxyz

Use the rotary switch if you want to switch over a VCR, DVD device or a Set Top Box.

Press the END and EPG buttons simultaneously for at least 5 seconds. The upper left indicator on the remote control will blink twice.

Enter the four numbers in sequence that you found in the code list (e.g. 0539 for Loewe DVD player).

You can switch over the six drive buttons

( , , , , , ), both for the TV and for the STB, to control a VCR or DVD player/recorder (the control of the integrated "Digital Recorder Plus" is preset at the factory):

After each number you enter, the indicator will blink once, after the last number it will blink twice. If the number was incorrect, the indicator will remain lit longer. The code number was not accepted. If the code was accepted with two blinks, you can test the functions of the device you just programmed.

TV

DVD STB

VCR

END

EPG

wxyz

tuv

First set the switch to the main function TV or STB.

Then press the END and EPG buttons simultaneously for at least 5 seconds. The upper left indicator on the remote control will blink twice.

Enter the the numbers 988 in sequence. The indicator will again blink two times.

If the device cannot be operated or can only be operated poorly, repeat the code entry with the next code from the list. If there are no other codes specified for this manufacturer, try it using the code suggestions from the remote control.

Setting the remote control using the suggestions from the remote control

Switch the device on that you want to switch over to the remote control. Standby mode is not enough.

tuv

TV

DVD STB

VCR

PIP

Now set the switch to the desired function for the drive buttons:

to DVD, VCR or to TV, if the digital recorder is to be operated.

Press the # PIP button to complete the setting. The indicator will blink two times.

TV

DVD STB

VCR

END

EPG

wxyz

Use the rotary switch if you want to switch over a VCR, DVD device or a Set Top Box.

Press the END and EPG buttons simultaneously for at least 5 seconds. The upper left indicator on the remote control will blink twice.

Enter the the numbers 991 in sequence. The indicator will

Setting the remote control to operate devices from other manufacturers

You can switch over the remote control for other VCRs, DVD players and Set Top

wxyz

PIP

blink once after each number entered.

Press the # PIP button to select the first code.

Boxes if the infrared code for the device type is listed in the code list or if it is included in the code memory of the RC3.

Even if the manufacturer of the device is listed in the code list, it may not be possible to operate that device using the Loewe remote control.

Setting the remote control using code entry

Search for the code number for your device in the code list (see as of pages

48-52). The list is arranged according to device type – DVD, VCR, STB – and alphabetically according to manufacturer. Next to the manufacturer’s name, you will find one or more code numbers.

Point the remote control toward the device you want to switch over to the remote control. Observe that device.

 

 

Now press the button

(Play) or On/Off on the remote

 

 

 

 

control.

 

 

 

 

Wait a moment for the device to react. If the device does not

PIP

react, then that was not the right code. Press the # PIP button

 

 

again to call the next code.

 

 

Press the button

(Play) or On/Off again.

 

 

EPG If the device reacts, press the EPG button to adopt the code.

39 -

Page 38 Page 40
Image 39
Page 38 Page 40
Contents Operating instructions Contents Remote control TV functions Digital RecorderOpen index Control units Spheros R 26 and R Control unit Spheros R Connections to rear panel Spheros R Connections to rear panel Spheros R 32 and R Welcome Set CleaningDisposal Packing and boxRating plate use For your safetyThis equipment must Only be connected to Which has the sameFirst installation Remote controlConnection Handling the fabric hose Using the common interface moduleSwitching on Antenna switch or from the twin LNC, to both SAT socketsStation sorting Automatic programmingSelect a TV channel First installation Daily operationSwitching on/off Directing DVB-T antennaVia the station list With the P+/P- buttons on the remote controlWith the numeric buttons of the remote control Changing stationsExample of the menu operation Basics about the menu operationFor the info system OKSelect SettingsUse To go to the previous/next letter This is how to select the index itemFor the index Control like on a mobile phone keypadSetting the sound Picture settingsDirect control on TV set Calling the index How the coloured keys work in TV modeOperating modes TV Show status displaySelect picture format Call timer overviewUnder Settings you will find the following functions Call additional functionsDVB subtitles Calling the CI module menu Installing new DVB softwareRemoving the CI module Inserting a new CI moduleImage+ demo mode Image+Image+ menu Picture in picture PIP Operating modes PIPPosition of the PIP picture Setting the PIP typeSwitch to small PIP Functions in the PIP menuEPG Programme guide Using the EPGMark this by using OK Operating modes EPGSelecting providers and stations Switch on TV when markedProgramming recording for recorders EPG menuDisplaying teletext pages Operating modes TeletextAnalogue Teletext Selection with the coloured keysMenu Display teletext menu Programme timer recordingsTeletext menu Digital teletext operation only for UK device versionEPG Programme guide Operating modes RadioRadio Radio menuLogin and connect equipment Connecting video/DVD recordersOperating additional equipment Now you will see the playback from the connected AV device Video playbackCalling AV input via the station list Calling AV inputs in the AV selection AV Call AV selectionAssignment of digital audio inputs and outputs Audio input Audio DigitalAudio output Audio Digital OUT Six pin Cinch Cubic plug cable Digital audio only required for TV as centre loud speakerComponent Video EURO-AV cable Link cableSound menu using the button, select Sound via and then TV Connecting other audio amplifiers or active speakersSet geometry Setting colour standardHdmi DVI connection VGA/XGA connectionComponent video connection Sound from PC or Set Top BoxSelect COMP. in sockets and use Setting the remote control using code entry Functions for Loewe VCR VV 8106, 8136 Using the RC3 remote control to operate a VCRSetting the position of the TV set when switched off Select SettingsRotating the TV set for Spheros R 32/37 What to do, if Problem Possible cause RemedyThat they fall between 1 WiredDigital Link Plus does not function Replace the Euro-AV cableGeneral data Technical dataConnections Electrical dataAccessories Switzerland Service AddressesLoewe Codelist RC3 / Lista de códigos RC3VCR SAT /STB SAT TPS Cable Box STB

R 32, R 26, R 37 specifications

Loewe, a renowned name in the world of premium audio and visual technology, has introduced an impressive lineup of products with the R 37, R 26, and R 32 models. Each of these models showcases the brand's commitment to high-quality sound, elegant design, and cutting-edge technology, making them suitable for any modern living environment.

The Loewe R 37 is designed for audio enthusiasts who seek rich, immersive sound. A standout feature of the R 37 is its advanced acoustic technology, which is engineered to deliver clear highs and deep lows, resulting in a well-balanced sound profile. The model is equipped with high-end speakers that support various audio formats, ensuring compatibility with modern streaming over Wi-Fi and Bluetooth. With its sleek design and elegant finish, the R 37 can seamlessly blend into any décor, making it not just a piece of technology but also a stylish addition to your home.

Moving on to the R 26, this model is regarded for its compact size without compromising audio quality. Living in smaller spaces doesn't have to mean sacrificing sound performance, and the R 26 excels in producing impressive audio output from its smaller form factor. It incorporates the same high-quality components found in larger models, ensuring that users experience rich sound even in tight quarters. Additionally, the R 26 features intuitive connectivity options, allowing for easy integration with smartphones, tablets, and other devices, enhancing its versatility for everyday use.

The Loewe R 32 takes functionality and design a step further by combining modern technology with user-friendly features. This model comes with an integrated screen that allows for visual feedback and interaction, creating a more engaging experience for users. The R 32 also boasts Smart Home integration capabilities, enabling seamless control through smart devices. Its robust sound performance is complemented by customizable audio settings, allowing users to tailor their listening experiences according to their preferences.

In summary, the Loewe R 37, R 26, and R 32 collectively demonstrate the brand's commitment to craftsmanship and innovation. With stunning designs, superior sound quality, and smart technologies, these models cater to a wide range of audio needs. Whether it’s the immersive experience of the R 37, the compact convenience of the R 26, or the enhanced features of the R 32, Loewe continues to set the standard for excellence in the audio market, ensuring that every listener can enjoy high-fidelity sound in style.
Top Page Image Contents