Loewe R 32, R 26 Programming recording for recorders, EPG menu, Selecting providers and stations

Page 28

Operating modes – EPG

In front of the programme’s title, the system places an ✓ . This station is switched later to this programme when the set is switched on. If the TV is off, it switches on again automatically at the beginning of the marked programme if this has been set in the EPG menu. If you are out, a security prompt prevents the TV set staying on unattended.

Before leaving the upper selection lines using the blue coloured key, select a specific line. If you have switched back to the programme list, you can change

this menu line using without having to leave the programme list.

Programming recording for recorders

The programme marked using the buttons can be prepared for recording by pressing the red coloured key. In the following menu, confirm the timer data or change them as required. Then, a red dot is set in front of this programme in the EPG programme list as an identification (if timer data is being transferred to the recorder, no red dot is set). If you select this programme, you can delete it from the timer using the red coloured key (if the timer data has been transferred to a recorder, the timer has to be deleted there).

EPG menu

 

 

Call EPG menu

 

 

MENU

 

 

 

 

 

 

 

 

 

 

 

 

 

INFO

END

 

 

 

EPG menu

 

 

 

 

 

Select provider OK

Station select Timer list Data capture

Switc

 

 

 

 

 

 

You will find the following settings in the EPG menu:

• Select provider • Station selection • Timer list • Data capture

• Switch on TV when marked

Selecting providers and stations

If you want to change the provider for analogue TV reception (the station which transmits EPG data) to have other stations evaluated, you can do this under "Select provider".

Select "Select provider" and call this menu using OK. If the station you want to switch to is not listed in the "Select provider" list, then use the yellow coloured key to start the automatic search for stations with EPG data. This takes a while.

Or, if you know the station that transmits EPG data, press the blue coloured key to compile manually. Select the provider in the station list and adopt it by using OK and return to the provider selection using .

Select the provider in "Select provider" and adopt it using OK. Then a station list search is performed. The stations offered by the provider are displayed in a list.

If you want certain stations to be omitted from the programme guide, you can select and deactivate these via Station selection. Call the station selection by using the blue coloured key.

Now all stations are displayed (the DVB stations, too). Stations indicated with E are analogue terrestrial/cable stations; stations indicated with D are digital stations ready for the programme guide. Select the stations you want to omit from the programme guide one after another and deactivate each one by using OK.

Data capture

After these settings or after each time the set is switched off using the mains switch, the data must first be collected, before switching on the set.

To do this, select the station you have defined as a provider and leave the TV set switched on for about one hour or switch the set to the standby mode. After about two minutes, the orange indicator on the set lights up (for Spheros R 37, both indicators light up). The data capture begins and lasts about 1 hour. The data are also automatically captured between 2 a.m. and 5 a.m. when the TV is switched to standby.

A prerequisite for data capture is that "Data capture" is "on" (for DVB + analogue) in the EPG menu.

Note: If the TV set is switched off using the mains switch or the mains plug is pulled out, all EPG data are lost.

If, for example, you cannot receive any analogue EPG providers or if you only use DVB, you should set the data capture to "on (only for DVB)".

Switch on TV when marked

You can have the TV switched on automatically from standby at the beginning of the marked programme. If you are not present at the time, a safety prompt makes sure the TV switches off again after 5 minutes.

- 28

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Operating instructions Contents Digital Recorder Remote control TV functionsOpen index Control units Spheros R 26 and R Control unit Spheros R Connections to rear panel Spheros R Connections to rear panel Spheros R 32 and R Welcome Cleaning DisposalPacking and box SetFor your safety This equipment must Only be connected toWhich has the same Rating plate useRemote control First installationConnection Using the common interface module Switching onAntenna switch or from the twin LNC, to both SAT sockets Handling the fabric hoseAutomatic programming Station sortingFirst installation Daily operation Switching on/offDirecting DVB-T antenna Select a TV channelWith the P+/P- buttons on the remote control With the numeric buttons of the remote controlChanging stations Via the station listBasics about the menu operation Example of the menu operationOKSelect Settings For the info systemThis is how to select the index item For the indexControl like on a mobile phone keypad Use To go to the previous/next letterPicture settings Setting the soundDirect control on TV set How the coloured keys work in TV mode Operating modes TVShow status display Calling the indexCall timer overview Under Settings you will find the following functionsCall additional functions Select picture formatDVB subtitles Installing new DVB software Removing the CI moduleInserting a new CI module Calling the CI module menuImage+ Image+ demo modeImage+ menu Operating modes PIP Picture in picture PIPSetting the PIP type Switch to small PIPFunctions in the PIP menu Position of the PIP pictureUsing the EPG Mark this by using OKOperating modes EPG EPG Programme guideSwitch on TV when marked Programming recording for recordersEPG menu Selecting providers and stationsOperating modes Teletext Analogue TeletextSelection with the coloured keys Displaying teletext pagesProgramme timer recordings Teletext menuDigital teletext operation only for UK device version Menu Display teletext menuOperating modes Radio RadioRadio menu EPG Programme guideConnecting video/DVD recorders Login and connect equipmentOperating additional equipment Video playback Calling AV input via the station listCalling AV inputs in the AV selection AV Call AV selection Now you will see the playback from the connected AV deviceAudio input Audio Digital Assignment of digital audio inputs and outputsAudio output Audio Digital OUT Digital audio only required for TV as centre loud speaker Component Video EURO-AV cableLink cable Six pin Cinch Cubic plug cableConnecting other audio amplifiers or active speakers Sound menu using the button, select Sound via and then TVSetting colour standard Hdmi DVI connectionVGA/XGA connection Set geometrySound from PC or Set Top Box Component video connectionSelect COMP. in sockets and use Setting the remote control using code entry Using the RC3 remote control to operate a VCR Functions for Loewe VCR VV 8106, 8136Select Settings Setting the position of the TV set when switched offRotating the TV set for Spheros R 32/37 Problem Possible cause Remedy What to do, ifWired Digital Link Plus does not functionReplace the Euro-AV cable That they fall between 1Technical data General dataElectrical data ConnectionsAccessories Service Addresses SwitzerlandCodelist RC3 / Lista de códigos RC3 LoeweVCR SAT /STB SAT Cable Box STB TPS

R 32, R 26, R 37 specifications

Loewe, a renowned name in the world of premium audio and visual technology, has introduced an impressive lineup of products with the R 37, R 26, and R 32 models. Each of these models showcases the brand's commitment to high-quality sound, elegant design, and cutting-edge technology, making them suitable for any modern living environment.

The Loewe R 37 is designed for audio enthusiasts who seek rich, immersive sound. A standout feature of the R 37 is its advanced acoustic technology, which is engineered to deliver clear highs and deep lows, resulting in a well-balanced sound profile. The model is equipped with high-end speakers that support various audio formats, ensuring compatibility with modern streaming over Wi-Fi and Bluetooth. With its sleek design and elegant finish, the R 37 can seamlessly blend into any décor, making it not just a piece of technology but also a stylish addition to your home.

Moving on to the R 26, this model is regarded for its compact size without compromising audio quality. Living in smaller spaces doesn't have to mean sacrificing sound performance, and the R 26 excels in producing impressive audio output from its smaller form factor. It incorporates the same high-quality components found in larger models, ensuring that users experience rich sound even in tight quarters. Additionally, the R 26 features intuitive connectivity options, allowing for easy integration with smartphones, tablets, and other devices, enhancing its versatility for everyday use.

The Loewe R 32 takes functionality and design a step further by combining modern technology with user-friendly features. This model comes with an integrated screen that allows for visual feedback and interaction, creating a more engaging experience for users. The R 32 also boasts Smart Home integration capabilities, enabling seamless control through smart devices. Its robust sound performance is complemented by customizable audio settings, allowing users to tailor their listening experiences according to their preferences.

In summary, the Loewe R 37, R 26, and R 32 collectively demonstrate the brand's commitment to craftsmanship and innovation. With stunning designs, superior sound quality, and smart technologies, these models cater to a wide range of audio needs. Whether it’s the immersive experience of the R 37, the compact convenience of the R 26, or the enhanced features of the R 32, Loewe continues to set the standard for excellence in the audio market, ensuring that every listener can enjoy high-fidelity sound in style.
Top Page Image Contents