Loewe R 37, R 26 Removing the CI module, Inserting a new CI module, Calling the CI module menu

Page 23

Operating modes – TV

Removing the CI module

1.

Switch the TV set off by pulling

 

 

 

the mains plug from the power outlet.

 

 

2.

Remove the cover from the back of the set

 

 

 

on the upper left.

 

INTERFACE

3.

Press the eject button at the module slot;

 

 

 

 

the module is unlocked.

 

COMMON

4.

Remove the module from the set.

CI module

 

Inserting a new CI module

After you insert a new CI module and switch the TV set on, the following dialogue is displayed:

Autom. station search

Your TV set has detected a new CI module. This requires a station search for all new receivable stations.

After you press the OK button, the system starts the wizard to carry out the automatic station search.

Check the proposed search parameters and let the set search for new stations.

Calling the CI module menu

Here you can call up information on the inserted common interface module and the smartcard. To do this, use the MENU button to call the TV menu, select the line "Settings", "Miscellaneous" and then the entry "CI module - xxx" (in place of "xxx" stands the name of the provider which is output by the smartcard. The content of this menu depends on the particular supplier of the CI module.

Note: This menu is only available for digital stations

Installing new DVB software

To ensure your DVB-S receiver is always performing at the state of the art, newly developed software versions are made available from time to time; these are broadcast via satellite and can be automatically installed on your set (only possible via ASTRA1).

Software is recognised automatically

The set can determine whether a new software version is available. This occurs at night when your EPG is automatically updated. For this, your TV set has to remain in the standby mode (do not switch off using the on/off button on the set).

If a new software version has been found, the set will indicate this with an on- screen message the next time the set is switched on: You can decide whether or not you want to download the new software.

Confirm using OK, so that the new software can be loaded and installed via satellite. Continue as set out in the "Downloading software" section.

Searching for new software

If you want to carry out a manual search for new software, proceed as follows:

1.Call the TV menu using the MENU button.

2.Confirm the "Settings" using OK.

3.Confirm the "Miscellaneous" using OK.

4.Select "DVB software" and press OK.

Update digital TV software

Current version: V3.x.x

You can search for a new software version with OK.

5.If you start the search using OK, the set checks if there is a new software version available.

6.If there is a new version available, the set generates an on-screen message.

Update digital TV software

Current version: V3.x.x

New version: V3.1.0

Downloading software

1.If you press OK in the dialogue above, you can decide whether you want to download the new software immediately, when you switch off the set or not at all. We recommend you always carry out the update of the digital software. This is the only way to ensure your set is always up to date.

2.If you do decide to update, the software is initialised on your set and you are informed of the status with a grey bar.

Do not switch your set off during this time. This process may take up to one hour. You will be informed when the process is completed.

3.After the software is updated, you will be asked to switch your TV set off and back on again using the on/standby switch.

If the update was not carried out, you will be asked several times when you switch on the set whether you want to carry out this update.

23 -

Image 23
Contents Operating instructions Contents Open index Remote control TV functionsDigital Recorder Control units Spheros R 26 and R Control unit Spheros R Connections to rear panel Spheros R Connections to rear panel Spheros R 32 and R Welcome Set CleaningDisposal Packing and boxRating plate use For your safetyThis equipment must Only be connected to Which has the sameConnection First installationRemote control Handling the fabric hose Using the common interface moduleSwitching on Antenna switch or from the twin LNC, to both SAT socketsStation sorting Automatic programmingSelect a TV channel First installation Daily operationSwitching on/off Directing DVB-T antennaVia the station list With the P+/P- buttons on the remote controlWith the numeric buttons of the remote control Changing stationsExample of the menu operation Basics about the menu operationFor the info system OKSelect SettingsUse To go to the previous/next letter This is how to select the index itemFor the index Control like on a mobile phone keypadDirect control on TV set Setting the soundPicture settings Calling the index How the coloured keys work in TV modeOperating modes TV Show status displaySelect picture format Call timer overviewUnder Settings you will find the following functions Call additional functionsDVB subtitles Calling the CI module menu Installing new DVB softwareRemoving the CI module Inserting a new CI moduleImage+ menu Image+ demo modeImage+ Picture in picture PIP Operating modes PIPPosition of the PIP picture Setting the PIP typeSwitch to small PIP Functions in the PIP menuEPG Programme guide Using the EPGMark this by using OK Operating modes EPGSelecting providers and stations Switch on TV when markedProgramming recording for recorders EPG menuDisplaying teletext pages Operating modes TeletextAnalogue Teletext Selection with the coloured keysMenu Display teletext menu Programme timer recordingsTeletext menu Digital teletext operation only for UK device versionEPG Programme guide Operating modes RadioRadio Radio menuOperating additional equipment Login and connect equipmentConnecting video/DVD recorders Now you will see the playback from the connected AV device Video playbackCalling AV input via the station list Calling AV inputs in the AV selection AV Call AV selectionAudio output Audio Digital OUT Assignment of digital audio inputs and outputsAudio input Audio Digital Six pin Cinch Cubic plug cable Digital audio only required for TV as centre loud speakerComponent Video EURO-AV cable Link cableSound menu using the button, select Sound via and then TV Connecting other audio amplifiers or active speakersSet geometry Setting colour standardHdmi DVI connection VGA/XGA connectionSelect COMP. in sockets and use Component video connectionSound from PC or Set Top Box Setting the remote control using code entry Functions for Loewe VCR VV 8106, 8136 Using the RC3 remote control to operate a VCRRotating the TV set for Spheros R 32/37 Setting the position of the TV set when switched offSelect Settings What to do, if Problem Possible cause RemedyThat they fall between 1 WiredDigital Link Plus does not function Replace the Euro-AV cableGeneral data Technical dataConnections Electrical dataAccessories Switzerland Service AddressesLoewe Codelist RC3 / Lista de códigos RC3VCR SAT /STB SAT TPS Cable Box STB

R 32, R 26, R 37 specifications

Loewe, a renowned name in the world of premium audio and visual technology, has introduced an impressive lineup of products with the R 37, R 26, and R 32 models. Each of these models showcases the brand's commitment to high-quality sound, elegant design, and cutting-edge technology, making them suitable for any modern living environment.

The Loewe R 37 is designed for audio enthusiasts who seek rich, immersive sound. A standout feature of the R 37 is its advanced acoustic technology, which is engineered to deliver clear highs and deep lows, resulting in a well-balanced sound profile. The model is equipped with high-end speakers that support various audio formats, ensuring compatibility with modern streaming over Wi-Fi and Bluetooth. With its sleek design and elegant finish, the R 37 can seamlessly blend into any décor, making it not just a piece of technology but also a stylish addition to your home.

Moving on to the R 26, this model is regarded for its compact size without compromising audio quality. Living in smaller spaces doesn't have to mean sacrificing sound performance, and the R 26 excels in producing impressive audio output from its smaller form factor. It incorporates the same high-quality components found in larger models, ensuring that users experience rich sound even in tight quarters. Additionally, the R 26 features intuitive connectivity options, allowing for easy integration with smartphones, tablets, and other devices, enhancing its versatility for everyday use.

The Loewe R 32 takes functionality and design a step further by combining modern technology with user-friendly features. This model comes with an integrated screen that allows for visual feedback and interaction, creating a more engaging experience for users. The R 32 also boasts Smart Home integration capabilities, enabling seamless control through smart devices. Its robust sound performance is complemented by customizable audio settings, allowing users to tailor their listening experiences according to their preferences.

In summary, the Loewe R 37, R 26, and R 32 collectively demonstrate the brand's commitment to craftsmanship and innovation. With stunning designs, superior sound quality, and smart technologies, these models cater to a wide range of audio needs. Whether it’s the immersive experience of the R 37, the compact convenience of the R 26, or the enhanced features of the R 32, Loewe continues to set the standard for excellence in the audio market, ensuring that every listener can enjoy high-fidelity sound in style.