Loewe R 37, R 26 First installation Daily operation, Directing DVB-T antenna, Switching on/off

Page 14

First installation

Daily operation

Directing DVB-T antenna

Note: not with DVB-T stations in UK.

If you use a room antenna to receive one or more DVB-T stations that have picture and sound interference, then you should change the location of where the antenna is set up.

To help you direct your antenna or to help you determine the most suitable location to set up the antenna, your TV set has a display for the signal quality

Switching on/off

Your TV is equipped with an eco-standby power supply unit. On standby, the power consumption drops to low power. If you want to save even more electricity, switch the set off with the mains switch. However, please bear in mind that EPG data (electronic programme guide) will be lost and programmed timer recordings will not be performed by the TV.

C/N and the signal strength Level.

Consult your specialist dealer to find out which channels and frequency bands (VHF or UHF) are used to broadcast the digital TV stations in your area.

On any one channel, several digital stations are broadcast.

Select a TV channel

1.

Call the "TV menu" via the MENU button.

 

 

2.

Use

to select "Settings", then use

to select the menu line

 

underneath.

 

 

 

3.

Select "Channels", then use

to select the menu line underneath.

 

 

 

 

 

 

 

 

 

 

 

 

TV menu

 

 

INFO END

 

 

 

 

Settings

 

 

 

 

 

 

Channels

 

Parental lock Timer functions Language

 

 

 

 

Manual adjustment

...

 

 

 

 

 

 

 

 

 

4.

Select "Manual adjustment" and call the menu using OK

 

(in UK, the manual adjustment does not work with DVB-T).

Manual adjustment

 

 

 

 

 

Signal source

DVB-T

DVB-C

Antenna/cable (analogue)

Channel

E 05

 

 

Frequency

177.50 MHz

 

 

Name

Test

 

 

Bandwidth

7 MHz

 

 

C/N 96

 

 

Level 99

 

 

 

 

 

 

 

 

 

 

 

 

END

5.

For digital stations, select "Signal source – DVB-T".

6.

Use the numerical buttons to specify the corresponding channel number.

 

Depending on the channel selected and country, the system automatically

 

sets the corresponding bandwidth of 7 or 8 MHz. You should only change

 

the bandwidth under special circumstances - if the channel raster in your

 

area is different from the standard.

 

When you receive a digital station, the system displays the signal quality C/

)

)

OK

RADIO

Switching off

If the TV set is switched on, you can switch it to standby using the blue ON/OFF button on the remote control or by using the indicator field on the set. The red lamp on the TV set lights up. If the orange indicator lights up or if both the green and red indicators light up, then, for Spheros R 37, a timer recording is being made, EPG data is being captured or radio operation without screen display is active.

Switching on the TV set

From standby, it is best to switch the set back on using the blue On/Off button or by using the numeric buttons of the remote control (1 – 99).

Or, for Spheros R 26/32, use the switch integrated in the indicator on the set.

The green indicator on the TV set lights up.

Or switch on the TV set with OK, you can then see the station list and select a station.

Switch on radio

With the RADIO button on the remote control or for Spheros R 26/32:

Switch on radio using R on the control ring of the TV set.

 

N via a bar/numeric value and the signal strength via Level. The antenna‘s

 

direction or position is best when the largest values possible are displayed

 

(long bar) for the signal quality and signal strength.

7.

Direct the antenna so that the largest numerical value/bar size is reached.

8.

If no signal is found in the channel set, you can start the frequency search

 

run by pressing the blue button within the band selected (VHF or UHF).

9.

Check the other channels one after another on which digital stations are

 

broadcast terrestrially in your area.

 

For the weakest station, direct the antenna so that the maximum numerical

 

value/bar size is achieved.

10. After you position or direct the antenna, we recommend to search for all the

 

stations using the "Search wizard"

 

(TV menu – Settings – Channels – Search wizard).

)

If you switch off the TV set using the mains switch on the set, the indicator no longer lights up.

For Spheros R 26/32: If the TV set is switched off via the mains switch, you have to switch it into the standby mode first via the mains switch and then switch it on using one of the above mentioned methods.

- 14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Operating instructions Contents Open index Remote control TV functionsDigital Recorder Control units Spheros R 26 and R Control unit Spheros R Connections to rear panel Spheros R Connections to rear panel Spheros R 32 and R Welcome Packing and box CleaningDisposal SetWhich has the same For your safetyThis equipment must Only be connected to Rating plate useConnection First installationRemote control Antenna switch or from the twin LNC, to both SAT sockets Using the common interface moduleSwitching on Handling the fabric hoseAutomatic programming Station sortingDirecting DVB-T antenna First installation Daily operationSwitching on/off Select a TV channelChanging stations With the P+/P- buttons on the remote controlWith the numeric buttons of the remote control Via the station listBasics about the menu operation Example of the menu operationOKSelect Settings For the info systemControl like on a mobile phone keypad This is how to select the index itemFor the index Use To go to the previous/next letterDirect control on TV set Setting the soundPicture settings Show status display How the coloured keys work in TV modeOperating modes TV Calling the indexCall additional functions Call timer overviewUnder Settings you will find the following functions Select picture formatDVB subtitles Inserting a new CI module Installing new DVB softwareRemoving the CI module Calling the CI module menuImage+ menu Image+ demo modeImage+ Operating modes PIP Picture in picture PIPFunctions in the PIP menu Setting the PIP typeSwitch to small PIP Position of the PIP pictureOperating modes EPG Using the EPGMark this by using OK EPG Programme guideEPG menu Switch on TV when markedProgramming recording for recorders Selecting providers and stationsSelection with the coloured keys Operating modes TeletextAnalogue Teletext Displaying teletext pagesDigital teletext operation only for UK device version Programme timer recordingsTeletext menu Menu Display teletext menuRadio menu Operating modes RadioRadio EPG Programme guideOperating additional equipment Login and connect equipmentConnecting video/DVD recorders Calling AV inputs in the AV selection AV Call AV selection Video playbackCalling AV input via the station list Now you will see the playback from the connected AV deviceAudio output Audio Digital OUT Assignment of digital audio inputs and outputsAudio input Audio Digital Link cable Digital audio only required for TV as centre loud speakerComponent Video EURO-AV cable Six pin Cinch Cubic plug cableConnecting other audio amplifiers or active speakers Sound menu using the button, select Sound via and then TVVGA/XGA connection Setting colour standardHdmi DVI connection Set geometrySelect COMP. in sockets and use Component video connectionSound from PC or Set Top Box Setting the remote control using code entry Using the RC3 remote control to operate a VCR Functions for Loewe VCR VV 8106, 8136Rotating the TV set for Spheros R 32/37 Setting the position of the TV set when switched offSelect Settings Problem Possible cause Remedy What to do, ifReplace the Euro-AV cable WiredDigital Link Plus does not function That they fall between 1Technical data General dataElectrical data ConnectionsAccessories Service Addresses SwitzerlandCodelist RC3 / Lista de códigos RC3 LoeweVCR SAT /STB SAT Cable Box STB TPS

R 32, R 26, R 37 specifications

Loewe, a renowned name in the world of premium audio and visual technology, has introduced an impressive lineup of products with the R 37, R 26, and R 32 models. Each of these models showcases the brand's commitment to high-quality sound, elegant design, and cutting-edge technology, making them suitable for any modern living environment.

The Loewe R 37 is designed for audio enthusiasts who seek rich, immersive sound. A standout feature of the R 37 is its advanced acoustic technology, which is engineered to deliver clear highs and deep lows, resulting in a well-balanced sound profile. The model is equipped with high-end speakers that support various audio formats, ensuring compatibility with modern streaming over Wi-Fi and Bluetooth. With its sleek design and elegant finish, the R 37 can seamlessly blend into any décor, making it not just a piece of technology but also a stylish addition to your home.

Moving on to the R 26, this model is regarded for its compact size without compromising audio quality. Living in smaller spaces doesn't have to mean sacrificing sound performance, and the R 26 excels in producing impressive audio output from its smaller form factor. It incorporates the same high-quality components found in larger models, ensuring that users experience rich sound even in tight quarters. Additionally, the R 26 features intuitive connectivity options, allowing for easy integration with smartphones, tablets, and other devices, enhancing its versatility for everyday use.

The Loewe R 32 takes functionality and design a step further by combining modern technology with user-friendly features. This model comes with an integrated screen that allows for visual feedback and interaction, creating a more engaging experience for users. The R 32 also boasts Smart Home integration capabilities, enabling seamless control through smart devices. Its robust sound performance is complemented by customizable audio settings, allowing users to tailor their listening experiences according to their preferences.

In summary, the Loewe R 37, R 26, and R 32 collectively demonstrate the brand's commitment to craftsmanship and innovation. With stunning designs, superior sound quality, and smart technologies, these models cater to a wide range of audio needs. Whether it’s the immersive experience of the R 37, the compact convenience of the R 26, or the enhanced features of the R 32, Loewe continues to set the standard for excellence in the audio market, ensuring that every listener can enjoy high-fidelity sound in style.
Top Page Image Contents