Loewe 23332507.020 guide

Operating additional equipment

Connecting other audio ampliﬁers or active speakers

In the connection wizard, select “HiFi/AV ampliﬁer” under “Equipment selection: audio component”. The connection wizard allows conﬁguration of different audio ampliﬁers (stereo ampliﬁers, surround ampliﬁers, analogue or digital) with different sound formats (Dolby Digital, dts, MPEG and Stereo/PCM). Refer to the operating instructions for the audio ampliﬁer to be connected.

Select “Digital“ under “Audio transmission“ for digital audio ampliﬁers. Connect the digital audio output of the TV AUDIO DIGITAL OUT to the digital audio input of the digital ampliﬁer.

Assign the digital audio input to the socket through which the corresponding picture is transmitted (e.g. AV2 if a DVD player is connected there). Then the digital sound is passed to the digital audio output of the TV set and fed to the external audio ampliﬁer via this.

Specify which sound formats can be decoded with your digital ampliﬁer (Dolby Digital, MPEG, dts).

Specify under “Type of ampliﬁer“ whether the digital ampliﬁer is a stereo or surround ampliﬁer.

If it is a surround ampliﬁer, specify whether or not the TV loudspeakers are to be used as centre loudspeakers. Connect the centre output of the ampliﬁer to the centre output of the TV using a cinch cable, if necessary.

Note: do not use the centre loudspeaker connection on the ampliﬁer; instead use the pre-ampliﬁer centre output.

		AUDIO IN		C	L R AUDIO OUT
	PREOUT		AUX1 IN AUX OUT		AUX 2
FL	C	FR	AUX1 IN AUX OUT		AUX 2
FL	C	FR	L	L
					DIGITAL
					IN
					DIGITAL
					OUT
SL	SUB	SR	R	R

Select “Analogue“ for “Sound transmission“ for analogue audio ampliﬁers. The sound for the analogue ampliﬁer is transmitted via the AUDIO OUT L/R connections of the TV to the audio ampliﬁer. Connect the ampliﬁer with two cinch cables.

Specify under “Type of ampliﬁer“ whether the analogue ampliﬁer is a stereo or surround ampliﬁer.

If it is a surround ampliﬁer, also specify whether or not the TV speakers are to be used as centre loudspeakers. Connect the centre output of the ampliﬁer to the centre output of the TV using a cinch cable, if necessary.

Note: do not use the centre loudspeaker connection on the ampliﬁer; instead use the pre-ampliﬁer centre output.

AUDIO IN C OUT AUDIO DIGITAL

	PREOUT		AUX1 IN AUX OUT AUX 2
FL	C	FR	L	L
				DIGITAL
				IN
				DIGITAL
				OUT
SL	SUB	SR	R	R

If you want to listen to the sound via the TV loudspeakers temporarily, call the

Sound menu using the button, select “Sound via“ and then “TV“.

When connecting active speakers, select “Active speakers” in the connection wizard under “Audio equipment selection”. The sound for the active speakers is transmitted via the AUDIO OUT L/R connections to the active speakers. Make connections to the active speakers using the cinch cables.

Make the audio settings on the TV set when active speakers are connected. When using an external audio ampliﬁer, make the audio settings on the audio ampliﬁer.

- 34