Loewe 23332507.020 Hdmi DVI connection, VGA/XGA connection, Set geometry, Setting colour standard

Page 35

Operating additional equipment

HDMI (DVI) connection

The HDMI connection (High Definition Multimedia Interface) allows digital picture and sound transmission via a connecting

cable, e.g. from Loewe DVD Recorder Centros 2102/2172 HD. The digital picture and sound data are transmitted without

data compression and therefore lose none of their quality. In the equipment connected, no analogue/digital conversion is necessary, which might also have lead to losses in quality.

DVI signals can be also be reproduced by the HDMI connection using a DVI/HDMI adapter cable. This is possible because HDMI is based on DVI and is downwardly compatible. That means that the digital video signals are transmitted via HDMI - no audio signals are transmitted, though. In addition, both use the same copy protection method HDCP.

Connect the set with an HDMI connection using an HDMI cable (type A, 19-pin) to the HDMI socket of the TV set. Log in the HDMI connection in the connection wizard (TV menu - Connections - New devices/modifications).

Select the HDMI connection in the AV selection.

 

Call AV selection

 

 

 

AV

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VGA

AV selection

 

COMP. IN

VIDEO VCR DVD AVS

 

 

HDMI/DVI

OK

OK

Select HDMI/DVI socket and use ...

 

OK

to call.

 

 

 

Start playback on the device connected with HDMI connection.

The set automatically recognises and sets the best possible format for the video. If transmission occurs via a DVI/HDMI adapter cable, then you can feed in the appropriate analogue audio via the audio input sockets AUDIO IN L/R on the TV set. The sound is reproduced via the TV speakers.

If you have connected a digital external audio amplifier, you can select the digital audio signal in the connection wizard (TV menu - Connections - New devices/modifications) and assign it to the HDMI/DVI socket. You can make the other settings for the audio amplifier as described for digital amplifiers on page 34. The digital audio signal of the DVI audio source is fed in at the AUDIO DIGITAL IN socket on the TV. Feed the digital audio signal from the TV AUDIO DIGITAL OUT to the external amplifier.

Set geometry: as described for the VGA/XGA connection

VGA/XGA connection

You can connect a PC or a Set Top Box (STB) and therefore use the TV screen as an output device.

Connect the PC/STB to the VGA/XGA socket on the TV using a VGA cable.

When connecting to a PC, first set one of the following screen resolutions on your PC.

800x600 60Hz (SVGA)

1024x768 60Hz (XGA).

When a Set Top Box is connected, set the following screen resolutions according to the options of the Set Top Box:

720x576i (PAL), 720x480i (NTSC), 720x480p (60 Hz)

720x480i, 720x 576i (SDTV – standard modi for STB) 720x576p (50 Hz) 1280x720p, 1920x1080i (HDTV modi)

Select the VGA/XGA connection in the AV selection.

AV Call AV selection

AV selection

 

 

AVS VGA

OK HDMI/DVI COMP. IN

VIDEO VCR DVD

OK

Select VGA socket and use ...

 

OK

to call.

 

Start the connected device.

 

Set geometry

 

Call the TV menu using the MENU button, select “Geometry“ using

and

set:

 

 

If the picture is not positioned correctly, you can move the picture horizontally and vertically here so that it fills the whole screen. You can also set the phase position so that the picture appears in the best possible quality.

Setting colour standard

Call the Picture menu using the button. Select “Colour standard“ using and make your selection.

The colour standard for a connected PC is RGB.

In Set Top Boxes, you usually set Ycc as a colour standard. Other formats such as Ypp or RGB can also be output. Please consult the operating instructions of the device connected.

If the wrong standard is selected, you will recognise this by the wrong colours in the display.

35 -

Page 34 Page 36
Image 35
Page 34 Page 36
Contents Operating instructions Contents Open index Remote control TV functionsDigital Recorder Station up Menu right Control unitsDisplay red = standby green = operation Only for sets with a Digital Recorder Call the menu Menu upAudio input left Connections to rear panelWelcome Set CleaningDisposal Packing and box10 cm For your safetyConnection First installationRemote control Use of the binders Using the common interface moduleSwitching on Handling the fabric hoseStation sorting Automatic programmingSelect a TV channel First installation Daily operationSwitching on/off Directing DVB-T antennaVia the station list With the P+/P- buttons on the remote controlWith the numeric buttons of the remote control Changing stationsExample of the menu operation Basics about the menu operationFor the info system OKSelect SettingsUse To go to the previous/next letter This is how to select the index itemFor the index Control like on a mobile phone keypadDirect control on TV set Setting the soundPicture settings Calling the index How the coloured keys work in TV modeOperating modes TV Show status displaySelect picture format Call timer overviewUnder Settings you will find the following functions Call additional functionsDVB subtitles Calling the CI module menu Installing new DVB softwareRemoving the CI module Inserting a new CI moduleImage+ menu Image+ demo modeImage+ Picture in picture PIP Operating modes PIPPosition of the PIP picture Setting the PIP typeSwitch to small PIP Functions in the PIP menuEPG Programme guide Using the EPGMark this by using OK Operating modes EPGSelecting providers and stations Switch on TV when markedProgramming recording for recorders EPG menuDisplaying teletext pages Operating modes TeletextAnalogue Teletext Selection with the coloured keysMenu Display teletext menu Programme timer recordingsTeletext menu Digital teletext operation only for UK device versionEPG Programme guide Operating modes RadioRadio Radio menuOperating additional equipment Login and connect equipmentConnecting video/DVD recorders Now you will see the playback from the connected AV device Video playbackCalling AV input via the station list Calling AV inputs in the AV selection AV Call AV selectionAudio output Audio Digital OUT Assignment of digital audio inputs and outputsAudio input Audio Digital Link cable Only required for TV as centre loud speakerDigital audio Component Video EURO-AV cableSound menu using the button, select Sound via and then TV Connecting other audio amplifiers or active speakersSet geometry Setting colour standardHdmi DVI connection VGA/XGA connectionOKSelect COMP. in sockets and use Component video connectionSound from PC or Set Top Box Log in the component/device in the connection wizardSetting the remote control using code entry Functions for Loewe VCR VV 8106, 8136 Using the RC3 remote control to operate a VCRRotating the TV set Setting the position of the TV set when switched offSelect Settings What to do, if Problem Possible cause RemedyThat they fall between 1 WiredDigital Link Plus does not function Replace the Euro-AV cableGeneral data Technical dataConnections Electrical dataAccessories Switzerland Service AddressesLoewe Codelist RC3 / Lista de códigos RC3VCR SAT /STB SAT TPS Cable Box STB
Top Page Image Contents