Loewe 23332507.020 manual Component video connection, Sound from PC or Set Top Box

Page 36

Operating additional equipment

Sound from PC or Set Top Box

Feed the analogue audio signal from the PC or the STB to the sockets AUDIO IN L/R on the TV via a cinch cable. The sound is reproduced via the TV speakers.

If you have connected a digital external audio ampliﬁer, you can select the digital audio signal in the connection wizard (TV menu - Connections - New devices/modiﬁcations) and assign it to the VGA/XGA socket. You can make the other settings for the audio ampliﬁer as described for digital ampliﬁers on page

34.The digital audio signal of the Set Top Box is fed in at the AUDIO DIGITAL IN socket on the TV. Feed the digital audio signal from the TV AUDIO DIGITAL OUT to the ampliﬁer.

Component video connection

If you have a DVD player/recorder with Component OUT connections, you can connect it to the SD/HD-COMPONENT

IN sockets of the TV instead of to the Euro-AV sockets. The connecting cable with three cinch plugs each transmits picture

information. The playback is of a better quality than via the Euro-AV socket. You need another cinch cable for the analogue sound transmission. Connect the analogue audio outputs of the DVD player to the AUDIO IN L/R sockets on the TV set. The sound is reproduced via the TV speakers.

If you want to use the digital sound of the DVD player with a digital audio ampliﬁer connected to the TV, make a connection between AUDIO DIG OUT of the DVD player and AUDIO DIGITAL IN of the TV set.

Log in the component/device in the connection wizard:

Assign the AUDIO DIG IN input here to the COMP. IN socket, provided a digital audio ampliﬁer is also connected. You can make the other settings for the audio ampliﬁer as described for digital ampliﬁers on page 34.

Set the signal at the component input in the connection wizard: Set to “Automatic“ ﬁrst. If the signal is not reproduced when playback is started, consult the operating instructions of the DVD device connected to ﬁnd out what screen resolution is possible (SDTV, HDTV or ProScan).

Select the component connection in the AV selection.

AV Call AV selection

AV selection
DMI/DVI COMP. IN	OK	VIDEO VCR DVD AVS VGA HDMI/DV

OKSelect COMP. IN sockets and use ...

OK

to call.

Start playback on the connected device.

Set geometry and colour standard: as described for the VGA/XGA connection.

- 36

Image 36

Contents Operating instructions Contents Remote control TV functions Digital RecorderOpen index Control units Display red = standby green = operationOnly for sets with a Digital Recorder Call the menu Menu up Station up Menu rightConnections to rear panel Audio input leftWelcome Cleaning DisposalPacking and box SetFor your safety 10 cmFirst installation Remote controlConnection Using the common interface module Switching onHandling the fabric hose Use of the bindersAutomatic programming Station sortingFirst installation Daily operation Switching on/offDirecting DVB-T antenna Select a TV channelWith the P+/P- buttons on the remote control With the numeric buttons of the remote controlChanging stations Via the station listBasics about the menu operation Example of the menu operationOKSelect Settings For the info systemThis is how to select the index item For the indexControl like on a mobile phone keypad Use To go to the previous/next letterSetting the sound Picture settingsDirect control on TV set How the coloured keys work in TV mode Operating modes TVShow status display Calling the indexCall timer overview Under Settings you will ﬁnd the following functionsCall additional functions Select picture formatDVB subtitles Installing new DVB software Removing the CI moduleInserting a new CI module Calling the CI module menuImage+ demo mode Image+Image+ menu Operating modes PIP Picture in picture PIPSetting the PIP type Switch to small PIPFunctions in the PIP menu Position of the PIP pictureUsing the EPG Mark this by using OKOperating modes EPG EPG Programme guideSwitch on TV when marked Programming recording for recordersEPG menu Selecting providers and stationsOperating modes Teletext Analogue TeletextSelection with the coloured keys Displaying teletext pagesProgramme timer recordings Teletext menuDigital teletext operation only for UK device version Menu Display teletext menuOperating modes Radio RadioRadio menu EPG Programme guideLogin and connect equipment Connecting video/DVD recordersOperating additional equipment Video playback Calling AV input via the station listCalling AV inputs in the AV selection AV Call AV selection Now you will see the playback from the connected AV deviceAssignment of digital audio inputs and outputs Audio input Audio DigitalAudio output Audio Digital OUT Only required for TV as centre loud speaker Digital audioComponent Video EURO-AV cable Link cableConnecting other audio ampliﬁers or active speakers Sound menu using the button, select Sound via and then TVSetting colour standard Hdmi DVI connectionVGA/XGA connection Set geometryComponent video connection Sound from PC or Set Top BoxLog in the component/device in the connection wizard OKSelect COMP. in sockets and useSetting the remote control using code entry Using the RC3 remote control to operate a VCR Functions for Loewe VCR VV 8106, 8136Setting the position of the TV set when switched off Select SettingsRotating the TV set Problem Possible cause Remedy What to do, ifWired Digital Link Plus does not functionReplace the Euro-AV cable That they fall between 1Technical data General dataElectrical data ConnectionsAccessories Service Addresses SwitzerlandCodelist RC3 / Lista de códigos RC3 LoeweVCR SAT /STB SAT Cable Box STB TPS