Metz 30 LCD-TV PIP, 30 TL 55 Tuning to TV stations Open the menu, Automatic Programme Search APS

6. Tuning to TV stations Open the menu

You can tune your TV set to TV stations in three different ways:

a) Automatic Programme Search (APS)

The automatic programme search searches the entire range of channels for TV stations. All sta- tions which are found are placed in a station table which is displayed at the end of the search. If you do not like the order in which the stations appear in this table, you can move stations to other posi- tions and/or delete unwanted stations. For further details, see Section 9, "Sorting the stations".

Executing an automatic programme search				MENU
• Press the "MENU" key to open the TV menu.
• Use the cursor key	to select the menu
"Settings".
• Use the cursor key	to select the menu item
"TV tuner".				OK
• Press the "OK" key and open the sub-menu
"Programming".
• Use the cursor key	to open the
sub-menu "APS".
• Use the cursor key	to select the
		aps
menu item "Auto setting".
• Press the "OK" key. You are then
asked if you really want to start the
		autoset		<ok> to enable
programme search.
• Press the "OK" key again to start
the search..
• A station table containing the
results of the search is displayed.
			<ok> to start aps function

•You can delete any unwanted sta-

tions from the table by selecting them with the cursor key and pressing the red key.

☞The settings are saved automatically when you close the TV menu.

15