Metz 30 LCD-TV PIP, 30 TL 55 manual Search, Reset

3. The remote control

	K e y				D V D			H i F i
							C D ( I-II )	T U N E R ( ￿ )	T A P E (	)
			On		On / Standby	ON: Display time/track		ON:Radio-text on/off
						ON&AV, ON:On/Standby		ON&AV, ON: On/Standby
					Return
					Angle			I-II & ON: CD	I-II & ON: CD
		0...9			Numeric keys: title selection	Num.keys: title select.		Num.keys: progr.select.
					Cursor up/down		Title +/–	Programme +/–
					Cursor left/right			Frequency +/–
			OK		OK / Enter
		Vol.+/–			TV volume +/-	AMP volume +/-		AMP volume +/-	AMP volume +/-
			Mute		TV mute
		Menu			MENU
				P-	Title
			Text		Display
			Info
			P+		Pause		Pause
			red		STOP/Search	STOP/OPEN-CLOSE/Search		Num.key =Search	Search
		green			PLAY		PLAY
		white			EJECT
		yellow			Skip +
			blue		Skip –
			￿		Audio	￿ & ON: Tuner			￿ & ON: Tuner
			I-II		Subtitle		& ON: Tape input	& ON: Tape input
21			TV
22			AV		Repeat		AUX input	AUX input	AUX input
23		Select			Select operating level	Select operating level		Select operating level	Select operating level

Search:

Proceed as described above for entering the codes for VCR, DVD, CD, tuner, tape as far as the step where the code number is entered. Then enter "001" for the search function. The LED blinks 2x to acknowledge the input. Then press and hold the search key (which depends on the operating level; see the table) until the device stops or switches off (a STOP or OFF command is automatically trans- mitted every 1.5 seconds).

Then release the search key and press the Select key to save the code which was found.

Reset:

Proceed as described above for entering the codes for VCR, DVD, CD, tuner, tape as far as the step where the code number is entered. Then enter "000" for the reset function. The LED blinks 2x to acknowledge the input. All codes are now reset to the factory default settings.

The reset is executed for all operating levels, regardless of the level from which it is initiated.

11