Using the TV features, Basic Operations

Using the TV features

Understanding the TV features

Multimedia - TV receiver, HDTV monitor and PC display, all in one.

Wider viewing angle, 16:9 display - over 160 viewing angle, 16:9 ergonomical display panel

Digital display device - truthfully reproducing the images, without distortion or blurring, irrespective of magnetic or geomagnetic effect.

Auto tuning function with 200 channels storage

Sleep/wake timer

TELETEXT

NICAM

Dual SCART interface

Multi-language OSD

Basic Operations

Power ON/OFF

1.Connect the TV to power outlet, the power indicator will flicker and then turn blue. About 10 seconds later, TV picture will display on the screen.

2.Press the POWER button on the remote control to turn off the TV temporarily.

3.If you decide to shut off the TV for a long time, it is recommended

that you unplug the power from the outlet.	POWER
	INDICATOR

Signal source selection

Press the number [1-9] button or [CH+/CH- ] button to select TV input; press the [VIDEO] button to select Video or Scart Video1(from SCART 1) or Scart Video 2(from SCART 2) input; press the [S-VIDEO] button to select S-Video input or Scart S-Video input(from SCART 2) ; press the [ YCbCr] button to select YCbCr input; press the [ YPbPr] button to select YPbPr input; press the [PC] button to select PC input.

Select channels by [CH+/CH-]

You can also use [ CH+/CH-] to select channels. [CH+] indicates channel number increase; [CH-]indicates channel

number decrease.

-8-