Specifications
,
RF system: | B/G, D/K, I, L/L |
|
|
Colour system: | PAL, SECAM, NTSC(only for AV) | ||
Channel coverage: | VHF Low channel (VL)= 48.25 to 160.00 MHz | ||
| VHF high channel (VH)= 160.00 to 442.00 MHz | ||
| UHF channel( U)= | 442.00 to 863.25 MHz | |
Power supply: | AC 100~240V, 50/60Hz |
| |
Power consumption: | 390W |
|
|
Audio output: | 7W+7W |
|
|
Speaker Impedance: | 8 |
|
|
Panel Resolution: | 852(W)*480(H) |
|
|
Connection interface: | RF input: | 1 CATV RF antenna input | |
| Video input: | 1 AV input | |
1
1Y Cb Cr / Y Pb Pr input
Graphic input: 1 analog RGB
Audio input: 1 AV audio
1PC audio
Scart:Scart1
| Scart2 |
| |
| 1 RS232C input interface for software updating | ||
Dimension: | 1043mm 640mm 85mm |
| |
Weight: | 32.5kg |
|
|
Accessories | Remote control | Batteries | S cable CATV cable Power cord User's manual |
| Desktop Stand | Speakers | Wall mounting bracket(optional) |
CUSTOMER NOTICE: IMPORTANT
Displaying a still picture for a long time will cause fluorescent burning which means permanent damage to the screen. Therefore, do NOT display the same picture on the screen for more than 10 minutes! This product has
Operate carefully to prevent damage to the screen.
Cleaning and Care
WARNING: TV sets use high voltage. Do not try to remove the cabinet back. Refer servicing to qualified service technicians.
To clean the TV screen:
1)Unplug the TV to avoid possible shock hazard.
2)Use a clean cellulose sponge or chamois cloth dampened with a solution of mild detergent and warm water to clean the TV screen and trim. Do not use too much water because water spills into the cabinet can cause damage to the TV.
3)Wipe off any excess moisture with a clean dry cloth.
4)Polish the cabinet with a quality furniture polish to maintain the finish and appearance of the cabinet.
Caution: Never use strong solvents such as thinner, benzene, or other chemicals on or near the cabinet. These chemicals can damage the finish of the cabinet.