Multi-Brand Control Feature
Multi-Brand Control Setup
The Remote Control can be set to control some TV functions.
1
2
Find your TV Brand Code Number from those shown below.
Set up for TV control,
➛hold down TV button,
➛enter code with NUMBER keys.
3 Confirm code entry,
➛press POWER to turn your TV on or off.
• See table below for controllable functions in each mode.
Notes
•Repeat setup after remote battery replacement.
•Remote will not control every TV made by the manufacturer listed. If you get no response, your particular unit cannot be controlled. There are NO additional codes for the products listed. If your product is not listed, then the remote is not compatible with that product.
Using Multi-Brand Control
After remote is set up, you can select VCR or TV for the desired function.
Press VCR or TV on the remote.
(Table below shows available unit buttons for each mode.)
Unit | VCR | TV | |
Mode | |||
|
| ||
VCR | All | VOL UP/DOWN | |
| VCR/TV, PLAY, STOP, EJECT, | POWER, INPUT, | |
TV | FF, REW, PAUSE/SLOW, REC, SPEED, CM/ZERO, | CH UP/DOWN, VOL UP/DOWN | |
| RESET COUNTER, TAPE POSITION |
| |
|
|
|
Notes
•Not all functions listed may be controllable.
•In TV mode, it may be necessary to press ENTER after pressing NUMBER keys for channel selection.
TV Brand Code Numbers
Panasonic | 01, 02 | Sony | 08 |
Quasar | 01, 02 | Toshiba | 09 |
RCA | 03 | Sanyo | 10 |
GE | 03 | Fisher | 10 |
Sharp | 06 | Hitachi | 12 |
Important Notes
•Some manufacturers use several codes for one brand. If the first code entered fails, try the next one listed.
•Some TV brands require you to turn on the power manually.
- 2 -