Panasonic PV-V464S operating instructions Before Using

: PLAY

Before Using

•

Congratulations

on your new purchase! With proper use, this dependable product will provide years of enjoyment. Please fill in the information below. (Serial number is on tag on back of VCR.)

•Date of Purchase

•Dealer Purchased From

•Dealer Address

•Dealer Phone No.

• Model No.	PV-V464S
• Serial No.
Accessories
Remote Control	Batteries 2 “AA”
EUR7723KA0

RF Coaxial Cable

LSJA0418

To order accessories, call toll free 1-800-332-5368.

Loading the Batteries

1) Open cover.

2) Insert batteries as marked.

3) Close cover.

Battery replacement caution

•Do not mix old and new batteries.

•Do not mix alkaline with manganese batteries.

Prevent Accidental Tape Erasure

Head Cleaning

Old or damaged tapes may clog heads.

Video Head Clog Sensor

Screen-right appears during

V I DEO HEADS MAY

play if clogging is detected. NEED CLEAN I NG

PLEASE I NSERT HEAD

To remove screen, press PLAY. CLEAN I NG CASSETTE

OR REFER TO MANUAL

• Use “ dry” type head

END

cleaning cassette only.

(Part No. NV-TCL30PT is recommended.)

•Follow cleaning tape instructions carefully. Excessive use of tape can shorten head life.

Built-in Head Cleaner

A clean video head helps produce a clear picture. So, we have equipped your VCR with a built-in, non- chemical head cleaning system that helps prevent clogging of the video heads. Cleaning is performed each time you load or unload a video cassette.

•This feature is preventative only, If your video heads are seriously clogged, consider the use of a chemical non-abrasive head cleaning kit or contact your nearest servicenter by visiting our Web Site (p.12).

Cleaning the VCR

Use soft, dry cloth or dusting attachment of a vacuum to remove dust from all cabinet vent holes. You may moisten cloth with non-abrasive, antistatic cleaner/ polisher.

Caution:

Alcohol and various solvents could damage finish.

Specifications

Power Source:	120 V AC, 60 Hz
Power Consumption: Power On
	Approx. 18 W
	Power Off
	Approx. 0.95 W
Video Signal:	EIA Standard NTSC color
Video Recording	4 rotary heads helical
System:	scanning system
Audio Track:	1 track (Normal)
	2 channel (Hi-Fi Audio Sound)

Tuner

Broadcast Channels: VHF 2 ~ 13, UHF 14 ~ 69

CABLE Channels: Midband A ~ I (14 ~ 22) Superband J ~ W (23 ~ 36) Hyperband AA ~ EEE

(37 ~ 64)

Lowband A-5 ~ A-1 (95 ~ 99) Special CABLE channel 5A (01) Ultraband 65 ~ 94, 100 ~ 125

Operating

Temperature: 5 °C ~ 40 °C (41 °F ~ 104 °F)

Operating Humidity: 10 % ~ 75 %

Weight:	2.55 kg (5.6 lbs).
Dimensions:	430 (W) x 98 (H) x 240 (D) mm
	16-15/16” (W) x 3-7/8” (H) x

9-7/16” (D) inch

Note: Designs and specifications are subject to change without notice.

Important Safeguards • Accessories • Head Cleaning • Loading Batteries • Prevent Tape Erasure • Specifications

Break off the tab to prevent recording.

Record Tab

Screw driver

To record again

Cover the hole with cellophane tape.

Features for a Quality Picture

Digital Auto Picture

Automatically controls the video output signal for less noise depending on the tape condition.

Digital Auto Tracking

Continuously analyzes the signal and adjusts for optimum picture quality.

Manual Tracking Control

(to reduce picture noise)

• Record/Playback

Record/Playback Time

Only use tapes with the mark in this unit.

Tape Speed	Type of Video Cassette
Setting	T120	T160	T180
SP	2 Hours	2 Hours	3 Hours
(Standard Play)		40 Minutes
SLP	6 Hours	8 Hours	9 Hours
(Super Long Play)

Use during Playback and Slow Motion mode to reduce picture noise.

Press CH (TRACKING) / on the remote control or on the VCR until the picture clears up. To return to Auto Tracking, press POWER off, then on again a few seconds later.

R		R
R	R	R	R
	R		R

V-Lock Control (to reduce picture jitter)

In Still mode, CH (TRACKING) / operate as a V-Lock control.

Time

- 3 -