Tape Operation, Index Search Repeat Play

Tape Operation

Search System

For each recording, an invisible index mark is placed on the tape.

A program index and information are also included for timer recordings.

These marks are used to access or scan recordings.

Index Search

Repeat Play

Set to playback a recording over and over. 1 Press ACTION to display menu.

2	MENU		Press	to select
	SET UP VCR		Press	to select
	SET UP CLOCK		“SET UP VCR,”
	SET UP CHANNEL		“SET UP VCR,”
	IDIOMA/LANGUE : ENGLISH		and press .
	VCR’S OUTPUT CH: 3		and press .
	SELECT :	SET:
	EXIT : ACTION

INDEX SEARCH

ENTER INDEX NUMBER :1 USING 1- 9 KEYS

FORWARD SEARCH :FF REVERSE SEARCH :REW

EXIT :SEARCH

INDEX SEARCH

FORWARD SEARCH :FF REVERSE SEARCH :REW

Press SEARCH* to display SEARCH in Stop or Play mode, and then press

NUMBER keys to select

recording number.

•To calculate number, see below.

Press FF or REW to start search.

Play begins at search end. To search forward or back 1 index, press FF or REW while screen left is displayed (10 sec.).

•To cancel, press PLAY or STOP.

3	SET UP VCR		Press	to select
	REPEAT PLAY	: OFF	“REPEAT PLAY,”
	AUTO SHUT-OFF	: OFF	“REPEAT PLAY,”
	FRONT DISPLAY	: ON	and press	to set
	AUTO VCR/TV	: ON	and press	to set
	TAPE SELECT	: T-120	“ON” or “OFF.”
			“ON” or “OFF.”
	SELECT :	SET:	ON :Play repeats at tape end
	EXIT : ACT I ON		ON :Play repeats at tape end

or if unrecorded portion over 30 sec. is detected.

4 Press ACTION

to return to normal screen.

Zero Search

To quickly return to a specified tape location.

To Calculate Index Number

Example 1:

To go to rec. 2 from rec. 4, enter 3 and press REW.

1	2	3	4		5	6	7

Example 2:

To go to rec. 6 from rec. 2, enter 4 and press FF.

1	2	3	4	5	6	7

NOTE: indicates start points of each recording.

Note

•If Index Search is started very close to an index mark, that index mark may not be counted in the search.

1 Press DISPLAY during play to display Counter.

2	PLAY	12 : 0 0AM	Press COUNTER RESET
		0 : 00 : 00	on remote at desired
		SP	on remote at desired
			position to reset to
			“0:00:00”.
3	Continue to record, playback, etc.
4	Press STOP.
5	REW	12 : 3 0AM CH 02	Press CM/ZERO in
		0 : 30 : 30	Stop mode to start
		SP	Stop mode to start

ZERO SEARCH.

• Unit will go into FF or REW

mode and stop at the last point the Counter was set to 0:00:00.

STOP 12 : 3 1AM CH 02

0: 00 : 00

- 6 -