Playback / Record on a Tape, Playback a Tape

Playback / Record on a Tape

•

Playback a Tape

1 Insert a tape.

• Loose or peeling labels may cause tape jam.

•VCR power comes on. “ VCR” lights on Multi Function Display.

If Auto VCR/TV (see p. 10 of Advanced Operations book) is set to “ OFF,” press VCR/TV until “ VCR” lights on the Multi Function Display.

2 Press PLAY to play tape.

• If tape has no rec. tab (p. 3), auto play begins.

Special Features During Play

Forward/Reverse Scene Search

➛Press FF or REW.

➛Press PLAY to release.

After search has begun, each additional press of FF or REW changes speed.

Notes

•Picture interruption may occur with some TVs.

•FF and REW search speed may vary depending on current tape position.

•After 10 minutes in search mode, VCR returns to Play mode to protect the tape and the video heads.

Still (Freeze) Picture

➛Press PAUSE/SLOW.

➛Press PLAY to release.

Slow Motion Picture

➛Hold down PAUSE/SLOW in Still mode.

➛Press PLAY to release.

Notes

•These features work best in SP or SLP mode.

•The sound will be muted.

•To reduce picture noise, see “Manual Tracking Control” on p. 3.

•After 3 minutes in Still or Slow mode, VCR stops to protect the tape and the video heads.

3 Press STOP to stop tape.

Rapid Rewind/FF

Press REW or FF in Stop mode to rewind or fast forward tape.

• Rewinds a T-120 tape in approx. 1 minute.

Record on a Tape

1 Insert a tape with a record tab (p. 3).

•VCR power comes on. “ VCR” lights on Multi Function Display.

If Auto VCR/TV (see p. 10 of Advanced Operations book) is set to “ OFF,” press VCR/TV until “ VCR” lights on the Multi Function Display.

2 Press CH or NUMBER keys to select the channel.

•If channel number is over 100, first press 100 key then the other 2 digits.

•For “LINE” input, see p. 9 of “Advanced Operations” book.

3 Press SPEED to set record speed (p. 3).

•SP = Standard Play

•SLP = Super Long Play

4 Press REC to start recording.

•To edit, press PAUSE/SLOW to pause, and again to resume recording.

5 Press STOP to stop recording.

One Touch Recording

(recording in progress)

Press REC repeatedly to set length as follows: 30 min. ➛ 1 hr. ➛ 1:30 ➛ 2:00 ➛ 3:00

➛4:00 ➛ exit.

The VCR shuts off at the length set.

Record one station, watch another

Press VCR/TV

(“VCR” goes out on Multi Function Display),

➛select channels on TV (recording continues).

Select channels on VCR

Press VCR/TV in Stop or Pause mode. (“VCR” lights on Multi Function Display),

➛select channels on VCR.

Notes

•Watching one channel and recording another is not possible when using Cable Box or DSS Receiver.

•After 5 minutes in Pause mode, VCR stops to protect the tape and the video heads.

Connections • Initial Setup • Clock Set • Select Channel • Playback • Record • Auto Operation

Press EJECT on remote,	This video recorder, equipped with HQ
or STOP/EJECT on VCR to eject tape.	(High Quality) system, is compatible with
	existing VHS equipment. Only use tapes
	with the	mark. Only tapes tested and

	inspected for use in 2, 4, 6, and 8 hour
	machines are recommended.