Storing TV Broadcasts in your VCR
Auto Tuning Using the On
Screen Display
The VCR is tuned automatically by Plug in Auto Tuning. However, Auto Tuning using the On Screen Display should be performed according to the following method if necessary.
POWER | DIRECT REC 6 JET SEARCH 5 |
| |
Í |
|
Preparations
≥Confirm that the TV is on and the VCR viewing channel is selected.
≥Turn on the VCR and select any program position except AV input.
≥Press VCR/TV to select the VCR mode.
On Screen Display
Operations
OSD MENU
1Press MENU.
≥LANGUAGE
CLOCK SET CHANNEL SET OPTION
SELECT :
, OK
END :MENU
1 | 2 | 3 |
|
4 | 5 | 6 | VOLUME |
|
|
| |
7 | 8 | 9 | + |
|
| 100 |
|
AV | 0 |
| – |
NAVI | INDEX |
| INPUT SELECT |
SEARCH | PICTURE MODE |
| REC |
MENU
OK
|
|
| VCR |
|
|
| TV |
1 | 2 | 3 | 4 |
| r | r | r |
| DATE | ON | OFF |
| s | s | s |
PROG. / CHECK | CANCEL | SPEED | TIMER |
|
|
| Á |
AUDIO | RESET | OSD/DISPLAY VCR/TV | |
Notes:
≥Auto Tuning searches for TV stations from VHF minimum to UHF maximum and memorizes every tuned program position. Other program positions are skipped.
≥Auto Tuning takes three or more minutes to complete its search.
≥If the VCR is not correctly tuned by Auto Tuning, follow the procedure on the next page.
2Select CHANNEL SET by pressing 3 or 4 and then press OK.
3Select ANTENNA SYSTEM by pressing 3 or 4 and then press OK.
4Select the desired system by pressing 3 or 4 and then press MENU.
5Select AUTO by pressing 3 or 4 and then press OK. ≥When Auto Tuning is
completed, the on screen display disappears and the lowest channel position at which a broadcast can be tuned in is received.
OSD MENU
LANGUAGE
CLOCK SET
≥CHANNEL SET
OPTION
SELECT :
, OK
END :MENU
CHANNEL SET
≥ANTENNA SYSTEM
AUTO MANUAL
SELECT :
, OK
END :MENU
ANTENNA SYSTEM
≥TV
CATV
SELECT :
END :MENU
CHANNEL SET
ANTENNA SYSTEM ≥AUTO
MANUAL
SELECT :
, OK
END :MENU
2
AUTO CHANNEL SET
PROCEEDING
END :MENU
14