Panasonic NV-FJ610PMP Playback will not operate correctly, Recording will not operate correctly

Page 40

Playback will not operate correctly

The symptom description is indicated in quatations “ ”.

“The picture is noisy or is not in color. Horizontal bars or lines run down the screen.”

‘Tracking is not correct.

Adjust the tracking. See page 38.

‘The TV has not been tuned to the VCR. Tune the TV to the VCR. See page 12.

‘The video heads are clogged or worn. Consult your dealer for further advice.

Recording will not operate correctly

The symptom description is indicated in quatations “ ”.

“The 1 indication flashes whenever recording is attempted.”

‘The erasure prevention tab on the video cassette has been broken off.

Use a tape with an intact erasure prevention tab, or cover the tab hole with adhesive tape, if the original recording is no longer required.

“The picture is recorded with noise or a blank screen.”

‘The antenna or antenna cable is defective.

Check the antenna connection to the VCR. See pages 9–10.

Check your normal TV picture. If there is no picture, check your antenna.

‘The VCR is not correctly tuned. Retune the VCR. See pages 12–15.

‘AV input has been selected. Select the required TV program.

“Timer recording cannot be performed.”

‘The clock or calendar has been incorrectly set.

Check the clock and calendar. Set them to the present time. (Note that this is a 24-hour clock.) See page 18.

‘The recording starting or ending time setting is incorrect.

Set the recording starting and ending time correctly.

‘The VCR has not been set for timer recording.

Press TIMER Á (TIMER REC Á) after programming for timer recording.

“AV external recordings cannot be made.”

‘AV input has not been selected. Select AV input by pressing INPUT SELECT.

‘External AV connections are incorrect. Check that the connections for external video and audio sources are correct.

See page 37.

‘A1 cannot be selected. DIRECT REC can be set to ON.

Set DIRECT REC to OFF. See page 23. (NV-FJ610PMP only)

The remote controller will not operate

correctly

The symptom description is indicated in quatations “ ”.

“The remote controller does not operate correctly.”

‘The remote controller transmitter beam is not reaching the VCR.

Ensure that the remote controller is being pointed at the VCR and that the transmitter beam is not obstructed.

‘The distance is too far.

Use the remote controller within 7 m of the VCR.

If this range is not possible, replace the batterries.

‘The batteries are exhausted. Replace the batteries. Note the precautions for replacement on page 8.

‘The batteries are incorrectly fitted with (+/-) reversed.

Fit the batteries correctly as shown on page 8.

40

Page 39 Page 41
Image 40
Page 39 Page 41
Contents NV-FJ610PMP NV-SJ410PMP CVC Crystal View Control Indicator Plug in Auto TuningLongrun Head System NV-SJ410PMPContents Controls and Connection Sockets NV-FJ610PMPBefore Use DATE, ON, OFF PROG./CHECK Cancel Speed Timer Á Infra-red Remote ControllerMenu OK Power Í Power Source for the Remote Controller Remote Controller SetupPrecautions for Battery Replacement Connections Basic ConnectionsConnection to a TV using the Audio/Video Input Sockets Cable Connection Plug in Auto Tuning Tuning the TV to your VCRTuning To Cancel Auto Tuning Mid- Operation To Restart Plug in Auto TuningDisplay Symbol To Change the RF OutputPreparations Storing TV Broadcasts in your VCROn Screen Display Operations Manual System Setting Procedure Channel PlanSetting the Remote Controller for Operation of your TV PreparationTo Select the Desired Language Language Setting of the On Screen DisplaySelect Language Idioma by pressing 3 or 4 and then press OK Setting the Clock of your VCR Time Reset FunctionTo Use the On Screen Display Settings Using the On Screen DisplayOn Screen Display Tape running display Stop, Eject InformationOn Screen Display Select Tape Select By pressing 3 orFor the Blue Background Function To Select the Jet Search Speed in the EP modeFor the Jet Navigator Function Auto Bilingual Choice Function NV-FJ610PMP only Audio Channel Selection NV-FJ610PMP onlySAP Select on or OFF by Select Direct REC byPressing 2 or Playback SlowOr / D PAUSE/SLOW ≥ Keep / D PauseTo Stop Playback Automatically Playback Off Timer Function Other Playback FunctionsTo Playback in the Desired Picture Quality Picture Mode To Eject the Video Cassette Using the Remote ControllerMode Characteristic Example for To Play back the Recorded Part RepeatedlyManual Recording Power Í/I Power ÍPress REC ¥ ¥ REC To Select the Desired Tape Speed To Interrupt RecordingTo View One TV Program while Recording Another One To Display the Approximate Remaining Tape TimeDirect Recording One-Touch Recording OTRPress Direct REC Key Programming ExamplePress PROG./ Check Set Starting time toWeekly Timer Recording Daily Timer RecordingTimer Recording from an External Signal Source Setting other Programs in SuccessionCancelling a Timer Program Checking a Timer ProgramTo cancel the Jet Navigator list Search FunctionsJet Navigator Jet Navigator listTo Set the Category Category Indication IconTo Check the Recorded Programming Data Time Stamp Function When Recording Over the Same Location on a TapeTo Demonstrate the Jet Navigator Function Recording Index Signals To Find the Beginning Each Recording VHS Index Search SystemAssembly Editing EditingRecording VCR PAUSE/SLOW againOther Functions Other Automatic FunctionsBefore Requesting Service Message of On Screen DisplayIndication H∑∑, F∑∑ VCR will not operate correctlyPlayback will not operate correctly Remote controller will not operate CorrectlyRecording will not operate correctly Avoid Sudden Changes in Temperature Usage PrecautionsHumidity and Dust Small Large Normal Amount Dirt on the video headsPicture Dirt Specifications NV-FJ610PMP NV-SJ410PMPVideo Audio
Top Page Image Contents