Setup menus
USER menu <BASIC>
No./Item |
|
| Description |
|
| ||
|
| ||
000 | This sets the preroll time. | ||
| The preroll time can be set from 0 to 15 seconds | ||
| in | ||
| 0000 | 0s | <Note> |
| : | : | When the automatic editing |
| 0005 | 5s mode [PREVIEW, AUTO EDIT] | |
| : | : is set, the unit will not operate if | |
| 0015 | 15s the preroll time is set to 0 | |
|
|
| seconds. |
|
| ||
001 | This selects the buttons which can be operated | ||
| on the front panel when the CONTROL switch | ||
LOCAL ENA | has been set to REMOTE. | ||
| 0000 | DIS : |
|
| No buttons can be operated. | ||
| 0001 | ST&EJ : |
|
| Only the STOP and EJECT buttons can be | ||
| operated. |
| |
| 0002 | ENA : |
|
| All buttons except for the RECORDER and | ||
| PLAYER buttons can be operated. | ||
|
| ||
002 | This selects the 12 or 24 hour display for the | ||
| CTL counter. |
| |
TAPE TIMER |
|
|
|
| 0000 | ±12h : 12 hour display | |
| 0001 | 24h : 24 hour display | |
|
| ||
003 | This selects whether the remaining tape time | ||
| and total tape length are to be displayed in the | ||
REMAIN SEL | superimposed display of the VIDEO OUT 3/ | ||
| SDI OUT 3 | ||
| signals. |
| |
| 0000 | OFF : No display. | |
| 0001 | 2L : |
|
| The remaining tape time is displayed on the | ||
| second line. |
| |
| 0002 | 1L : |
|
| The remaining tape time is displayed on the | ||
| first line. |
| |
| 0003 | R/TTL : |
|
| The remaining tape time is displayed on the | ||
| first line, and the total tape length is displayed | ||
| in the second line. | ||
| <Notes> |
| |
| OWhen “2L” is selected, the remaining tape time | ||
| is not displayed if “TIME” has been selected as | ||
| the setup menu item No.008 (DISPLAY SEL) | ||
| setting. |
| |
| OWhen “R/TTL” is selected, the total tape length | ||
| is not displayed if “TIME” has been selected as | ||
| the setup menu item No.008 (DISPLAY SEL) | ||
| setting. |
| |
|
|
|
|
The underlined items indicates the initial setting.
No./Item |
| Description |
|
| |
|
| |
006 | This selects whether or not to synchronize | |
| between two VTRs. | |
SYNCHRONIZE |
|
|
| 0000 | OFF : |
| No synchronization. The editing points deviate | |
| several frames, but editing can be started | |
| quickly. |
|
| 0001 | ON : |
| Synchronization. Allows for | |
008This selects what information is to be provided by the time code and other super
DISPLAY SEL displays output to the VIDEO OUT 3/SDI OUT 3
0000 TIME : Data only.
(The data indicates the value for whichever of CTL, TC or UB currently selected by the COUNTER button.)
0001 T&STA : Data and operation status.
0002 T&S&M : Data, operation status and mode.
0003 T&RT : Data and REC TIME
0004 T&YMD :
Data and REC DATE (year/month/day)
0005 T&MDY :
Data and REC DATE (month/day/year)
0006 T&DMY :
Data and REC DATE (day/month/year)
0007 T&UB :
Data and user’s bit.
However, when UB has been selected with the COUNTER button, the time code is displayed after the user’s bit.
0008 T&CTL :
Data and CTL data.
However, when CTL has been selected with the COUNTER button, the time code is displayed after the CTL data.
0009 T&T :
Data and time code.
0010 VITC:
The time code and user’s bit recorded in the
VAUX area are displayed.
<Notes>
OMode display:
DVCPRO (25 Mbps) = DVCPRO, DV = DV, DVCAM = DVCAM
OAn error message appears if a warning or error has occurred when “T&S&M” has been selected as this setting.
OREC TIME and REC DATE are displayed during DV/DVCAM, playback only. With the DVCPRO (25 Mbps) format, the operating mode is displayed.
34